Effect of normalizing process on mechanical properties of submerged-arc weldment
العناوين الأخرى
تحسين الخواص الميكانيكية لملحومات القوس الكهربائي القاطع باستخدام المعاملة الحرارية بالمعاملة
المؤلف
المصدر
Engineering and Technology Journal
العدد
المجلد 29، العدد 8 (31 ديسمبر/كانون الأول 2011)، ص ص. 1554-1562، 9ص.
الناشر
تاريخ النشر
2011-12-31
دولة النشر
العراق
عدد الصفحات
9
التخصصات الرئيسية
العلوم الهندسية والتكنولوجية (متداخلة التخصصات)
الموضوعات
الملخص AR
تعتبر عملية لحام القوس المغمور عملية فعالة في ربط المعادن و التي تستخدم بصورة واسعة في معظم تطبيقات الصناعات الفخمة كبناء السفن، و الخزانات و للمعدات الزراعية.
استخدم بفي هذا العمل فولاذ سبائكي منخفض الكربون تحت ظروف لحام هي : (تيار-500 أمبير)، (سرعة لحام-42 سم / دقيقة)، (قطر سلك اللحام3.25 ملم) و بتيا و قطيبة مباشرة، مع شكل لهندسية وصلة اللحام –V- على المعادلة الحرارية بالمعادلة و ذلك لاستعادة الخواص المكانيكية الأصلية.
في هذا العمل تم دراسة معدنين مختلفين من الحشو المعدني في حالتي الملوحة قبل و بعد المعاملة الحرارية بالمعادلة.
استعمل المجهر الضوئي للكشف عن بنية الملوحات.
كما أجريت اختبار الشد، المتانة بمقياس شاربي و قياس الصلادة الدقيقة في تقيم الخواص الميكانيكية لوصلة اللحام.
توضح النتائج بأن العاملة الحرارية بالمعادلة تقلل من بنية التراكيب الطويلة الأصلية للملوحة و تحولها إلى بنية متسلوية المحاور.
و قد لوحظ نقصان في خواص الشد خاصة مقاومة الخضوع بعد إجراء المعاملة الحرارية بالمعادلة مع زيادة خاصية المتانة (طاقة شاربي).
الملخص EN
Submerged arc welding is carried out and efficient metal- joining process widely used in great importance in many industrial applications, structures of ships, storage tanks and agriculture equipment's.
Low alloy steel used under welding conditions which are, (560 Amp) welding current, (42cm / min) welding speed, (3.25mm) wire diameter, direct current straight polarity (DCSP) with the joint geometry of single–Vbutt joint and weld one pass are used for plate of thickness 16mm.
After welding, the components have be submitted to a normalization heat treatment in order to recover the original mechanical properties of the welds.
In this work two different filer metals both in the as welded condition and after normalizing heat treatment have been studied.
Optical microscopy was used to observe the weld microstructure.
Tensile and Charpy V toughness testing and micro hardness measurements were used to evaluate the mechanical properties of joint.
Results show that normalizing reduces the original columnar structure in the as welded condition to an equiaxial structure.
It was observed a high decrease in the tensile properties specially the yield strength after normalizing.
In respect of toughness, the normalizing heat treatment was observed to increase the Charpy V energy.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ulwan, Abbas Sheyaa. 2011. Effect of normalizing process on mechanical properties of submerged-arc weldment. Engineering and Technology Journal،Vol. 29, no. 8, pp.1554-1562.
https://search.emarefa.net/detail/BIM-289630
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ulwan, Abbas Sheyaa. Effect of normalizing process on mechanical properties of submerged-arc weldment. Engineering and Technology Journal Vol. 29, no. 8 (2011), pp.1554-1562.
https://search.emarefa.net/detail/BIM-289630
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ulwan, Abbas Sheyaa. Effect of normalizing process on mechanical properties of submerged-arc weldment. Engineering and Technology Journal. 2011. Vol. 29, no. 8, pp.1554-1562.
https://search.emarefa.net/detail/BIM-289630
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes appendices : p. 1559-1562
رقم السجل
BIM-289630
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر