Study the optimization parameters for spring back phenomena in U-die bending
العناوين الأخرى
دراسة المتغيرات المثلى لظاهرة الرجوعية في عملية الحني U-die
المؤلفون المشاركون
Mansur, Khalidah Kazim
Yunus, Karim Muhsin
Hamad, Asil
المصدر
Engineering and Technology Journal
العدد
المجلد 31، العدد 9 (30 يونيو/حزيران 2013)، ص ص. 1705-1718، 14ص.
الناشر
تاريخ النشر
2013-06-30
دولة النشر
العراق
عدد الصفحات
14
التخصصات الرئيسية
الموضوعات
الملخص AR
الهدف الرئيسي لهذا البحث هو إيجاد العوامل المثلى التي تقلل الرجوعية باستخدام البرنامج (SPSS) لتحليل البيانات و إيجاد أفضل المتغيرات و التي ستعطي أقل رجوعية في قالب الحني باستخدام صفيحة من الألمنيوم و بسمك (0.09) ملم حيث وجد أنه بزيادة سرعة البنج تزداد قيمة الرجوعية و بأقل قيمة للرجوعية باتجاه درفلة 90 و عند زيادة زمن الانتظار يقل مقدار قيمة الرجوعية و قيم المتغيرات المتوقعة في برنامج SPSS سيقلل من قيم الرجوعية و بالتالي سنحصل على الأبعاد المرجوة من المنتج يتم توقع الرجوعية من خلال معادلة خاصة و التي أعطت معامل ترابط مقداره 95.
4 % ما بين القيم المقاسة و القيم المتوقعة للمتغيرات المعتمدة.
الملخص EN
The main objective of the research is to find the optimum parameters that reduce the springback by using the commercially [SPSS] program to analysis data and find the best parameters which given lowest springback in the U-die bending.
A commercial aluminum alloy [AL-1050] sheet (0.9 mm) thickness that founded when punch speed increase the springback increase, when rolling direction angle is 90 o Lower springback, and when increase the dwell time decrease the springback, and the value of parameters predicted from [SPSS] have lower springback and obtain a goal dimension for the products.
And predict the springback value by especial equations which given correlation coefficient 95.4 % between the observed value of the dependent variable and the predicted value.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Yunus, Karim Muhsin& Hamad, Asil& Mansur, Khalidah Kazim. 2013. Study the optimization parameters for spring back phenomena in U-die bending. Engineering and Technology Journal،Vol. 31, no. 9, pp.1705-1718.
https://search.emarefa.net/detail/BIM-346009
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Yunus, Karim Muhsin…[et al.]. Study the optimization parameters for spring back phenomena in U-die bending. Engineering and Technology Journal Vol. 31, no. 9 A (2013), pp.1705-1718.
https://search.emarefa.net/detail/BIM-346009
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Yunus, Karim Muhsin& Hamad, Asil& Mansur, Khalidah Kazim. Study the optimization parameters for spring back phenomena in U-die bending. Engineering and Technology Journal. 2013. Vol. 31, no. 9, pp.1705-1718.
https://search.emarefa.net/detail/BIM-346009
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 1717-1718
رقم السجل
BIM-346009
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر