Experimental study for materials prosthetic above knee socket under tensile or fatigue stress with varying temperatures effect

العناوين الأخرى

دراسة عملية لمواد وقب طرف سفلي صناعي أعلى الركبة تحت تأثير إجهاد الشد أو الكلال عند مختلف درجات الحرارة

المؤلفون المشاركون

Jayyad, Jumah Salman
Wasmi, Hatim Rahim
Hamzah, Adawiyah Ali

المصدر

Journal of Engineering

العدد

المجلد 20، العدد 3 (31 مارس/آذار 2014)، ص ص. 87-95، 9ص.

الناشر

جامعة بغداد كلية الهندسة

تاريخ النشر

2014-03-31

دولة النشر

العراق

عدد الصفحات

9

التخصصات الرئيسية

العلوم الهندسية والتكنولوجية (متداخلة التخصصات)

الموضوعات

الملخص AR

يتعرض متيقي العضو المبتور إلى إجهاد شد أو كلال متكرر مع اختلاف في درجات الحرارة بشكل دائم.

إن تعرض الطرف المبتور إلى إجهاد كلال متكرر و درجات الحرارة المختلفة يسبب في كثير من الأحيان بيئة لنمو الفطريات و البكتريا ناهيك عن الضرر الذي يتعرض له متبقي الطرف المبتور بالإضافة إلى الضرر الذي يحدث في الطرف الصناعي مما يسبب عدم راحة ذوي الاحتياجات الخاصة بالإضافة إلى قصر عمر الطرف الصناعي. في هذا البحث تم استخراج الخواص الميكانيكية و الحرارية للمواد المركبة الداخلة في تصنيع وقب طرف سفلي صناعي أعلى الركبة مصنع من البرلون / ألياف الزجاج / البرلون ذو طبقات مختلفة و ذلك باستخدام جهاز اختبار شد معرض إلى درجات حرارة مختلفة ( من 20 إلى 60 درجة مئوية).

كذلك تم في هذا البحث تصميم و تصنيع و معايرة جهاز اختبار كلال انحناء دوراني حراري (الجهاز غير متوفر في العراق) و ذلك لغرض استخراج منحنيات الإجهاد - عدد الدورات للوصول إلى الفشل لطبقات مختلفة من المواد المركبة برلون / ألياف الزجاج / برلون المصنوع منها وقب الطرف الصناعي.

أن نتائج الخواص الميكانيكية و الحرارية التي استخرجت في هذا البحث مثل (معامل المرونة و إجهاد الخضوع و إجهاد الشد الأعظم والمتانة و معامل التمدد الحراري) للمواد المركبة التي ذكرت أعلاه تقل مع ارتفاع درجات الحرارة.

كذلك وجد بأن نتائج منحنيات الاجهاد – عدد الدورات للوصول إلى الفشل من خلال اختبار أجهاد كلال الانحناء كذلك وجد أن اجهادات حد التحميل تقل مع زيادة عدد طبقات البرلون و ارتفاع درجات الحرارة بعد حوالي عشرة ملايين دورة.

الدوراني لصفائح المواد المركبة المذكورة تقل مع ارتفاع درجات الحرارة.

الملخص EN

The residual limb within the prosthesis, is often subjected to tensile or fatigue stress with varying temperatures.

The fatigue stress and temperatures difference which faced by amputee during his daily activities will produces an environmental media for growth of fungi and bacteria in addition to the damage that occurs in the prosthesis which minimizingthe life of the prosthetic limb and causing disconfirm feeling for the amputee.

In this paper, a mechanical and thermal properties of composite materials prosthetic socket made of different lamination for perlon/fiber glass/perlon, are calculated by using tesile test device under varying temperatures ( from 20oC to 60oC), also in this paper a device for measuring rotational bending fatigue stress under varying temperatures was designed, manufactured, and calibrated ( this device is not available in Iraq), to achieve S – N curves for different lamination of perlon/fiber glass/perlon composite materials of prosthetic above knee socket.

In this paper, the mechanical and thermal properties set ( E, σy, σult, K, and α ) results of the above composite materials are decreased when the temperatures are increased.

The S–N curves results of rotational bending fatigue for these lamination of composite materials are decreased when the temperatures are increased,also the endurance limit stresses (σe) are decreased with the increasing of number of perlon, and increasing temperatures, generaly after about 107 cycles.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

Wasmi, Hatim Rahim& Jayyad, Jumah Salman& Hamzah, Adawiyah Ali. 2014. Experimental study for materials prosthetic above knee socket under tensile or fatigue stress with varying temperatures effect. Journal of Engineering،Vol. 20, no. 3, pp.87-95.
https://search.emarefa.net/detail/BIM-376939

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

Wasmi, Hatim Rahim…[et al.]. Experimental study for materials prosthetic above knee socket under tensile or fatigue stress with varying temperatures effect. Journal of Engineering Vol. 20, no. 3 (Mar. 2014), pp.87-95.
https://search.emarefa.net/detail/BIM-376939

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

Wasmi, Hatim Rahim& Jayyad, Jumah Salman& Hamzah, Adawiyah Ali. Experimental study for materials prosthetic above knee socket under tensile or fatigue stress with varying temperatures effect. Journal of Engineering. 2014. Vol. 20, no. 3, pp.87-95.
https://search.emarefa.net/detail/BIM-376939

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes appendices : p. 92-95

رقم السجل

BIM-376939