Design and modelling of (Fe Zro2) functionally graded materials : part I
العناوين الأخرى
تصميم و نمذجة مادة متدرجة بالخواص ذات أساس (حديد زركوينا) : الجزء الأول
المؤلفون المشاركون
Atiyah, Ala Abd al-Hasan
Aziz, Ahmad Taifor
المصدر
Engineering and Technology Journal
العدد
المجلد 32، العدد 7A (31 يوليو/تموز 2014)، ص ص. 1843-1858، 16ص.
الناشر
تاريخ النشر
2014-07-31
دولة النشر
العراق
عدد الصفحات
16
التخصصات الرئيسية
العلوم الهندسية والتكنولوجية (متداخلة التخصصات)
الموضوعات
الملخص AR
نأمل في هذا البحث التوصل إلى نمذجة مادة متدرجة بالخواص ذات أساس (حديد / زركونيا) مكونة من خمس طبقات جرى تصميمها للعمل في تطبيقات درجات الحرارة العالية.
إن هذا الجزء من البحث بدأ بافتراض أن من الممكن ربط طبقتين مكونتين من مادتين مختلفتين.
و هاتان الطبقتان يتم ربطهما من خلال ثلاثة طبقات متدرجة.
إن سمك هذه الطبقات الثلاثة (RF) قد تم تصميمه و اختياره باستخدام طريقة العناصر المحددة من خلال برنامج (COMSOL).
و لقد تم استخدام هذا البرنامج بعمق لاختبار أفضل نسبة سمك للطبقات الوسطية المتدرجة (%RF) التي تربط كما أشرنا طبقة الحديد من الأسفل مع طبقة الزركونيا من الأعلى.
تم دراسة تأثير عاملين مهمين و هما المعامل (n) و كذلك (%RF ) اللتان تعطيان أقل إجهادات متبقيه بين الطبقات.
تم احتساب الإجهادات الحرارية التي تنتج عن تعرض المادة إلى درجات حرارية عالية.
إن النمذجة ببرنامج COMSOL أثبتت أن نسبة RF % = 80 % و N = 0.7) سوف تعطيان إجهادات متبقية منخفضة عندما تعمل المادة في درجات حرارة عالية (1000 مئوي) و خواص ميكانيكيه عالية.
الملخص EN
It is hoped to design and modeling of five layers Fe/ZrO2 functionally graded materials for high temperature applications in this paper.
The design part, were started with the supposing of connecting two distinct material layers.
The two layers were associated by a graded interface composing of three layers.
Thickness of graded layer (i.e.
RF) was designed and tested with the FEM method through the COMSOL package.
The software was used extensively to examine the best graded part thickness percentage (i.e.RF %) that connecting the two different material layers.
Two parameters were examined such as N and RF% to determine the best value of (N) and (RF %) that imparts low residual stresses.
Thermal stresses that developed as a result of exposing of material to high temperature environments also calculated.
The simulation indicates that the sample with (RF= 80% and N = 0.
7) Provides minimum residual stress at high working temperature 1000℃ with good mechanical properties.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Atiyah, Ala Abd al-Hasan& Aziz, Ahmad Taifor. 2014. Design and modelling of (Fe Zro2) functionally graded materials : part I. Engineering and Technology Journal،Vol. 32, no. 7A, pp.1843-1858.
https://search.emarefa.net/detail/BIM-409897
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Atiyah, Ala Abd al-Hasan& Aziz, Ahmad Taifor. Design and modelling of (Fe Zro2) functionally graded materials : part I. Engineering and Technology Journal Vol. 32, no. 7A (2014), pp.1843-1858.
https://search.emarefa.net/detail/BIM-409897
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Atiyah, Ala Abd al-Hasan& Aziz, Ahmad Taifor. Design and modelling of (Fe Zro2) functionally graded materials : part I. Engineering and Technology Journal. 2014. Vol. 32, no. 7A, pp.1843-1858.
https://search.emarefa.net/detail/BIM-409897
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 1858
رقم السجل
BIM-409897
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر