Improve the surface characteristics of the electric discharge machining employing a method burnishing process
المؤلفون المشاركون
Abd al-Wahhab, Ahmad B.
Aghdiaba, Shukri H.
Abd al-Amir, Ahmad G.
Ismail, Majid H.
المصدر
Engineering and Technology Journal
العدد
المجلد 38، العدد 4A (30 إبريل/نيسان 2020)، ص ص. 545-551، 7ص.
الناشر
تاريخ النشر
2020-04-30
دولة النشر
العراق
عدد الصفحات
7
التخصصات الرئيسية
الموضوعات
الملخص EN
Electrical Discharge Machining (EDM) applies the concept of material eradication by utilizing electric spark erosion.
The target of this exploration concentrates to examine the ideal procedure parameters of EDM on Aluminum 6061-T6as a workpiece with copper as a tool electrode.
The effect of various process operators 'on machining rendering was examined.
Internal factors with current (10, 20, 30) Ampere, pulse on time (50, 100, 150) μs was used after which takes pulse off time (25, 50, 75) μs.
All parameters applied for empirical acts with influence on Ra (surface roughness ).
The result showed that MRR" Material Removal Rate” is increment by expanding in current and pulse on time and it declines by expanding in pulse off time.
Optimal condition are gained when using" Using current 30 Ampere, pulse on time is 150 μs and minimize assessment of pulse off time is 25 μs.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Aghdiaba, Shukri H.& Abd al-Amir, Ahmad G.& Abd al-Wahhab, Ahmad B.& Ismail, Majid H.. 2020. Improve the surface characteristics of the electric discharge machining employing a method burnishing process. Engineering and Technology Journal،Vol. 38, no. 4A, pp.545-551.
https://search.emarefa.net/detail/BIM-972144
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Aghdiaba, Shukri H.…[et al.]. Improve the surface characteristics of the electric discharge machining employing a method burnishing process. Engineering and Technology Journal Vol. 38, no. 4A (2020), pp.545-551.
https://search.emarefa.net/detail/BIM-972144
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Aghdiaba, Shukri H.& Abd al-Amir, Ahmad G.& Abd al-Wahhab, Ahmad B.& Ismail, Majid H.. Improve the surface characteristics of the electric discharge machining employing a method burnishing process. Engineering and Technology Journal. 2020. Vol. 38, no. 4A, pp.545-551.
https://search.emarefa.net/detail/BIM-972144
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 550-551
رقم السجل
BIM-972144
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر