Improvement the mechanical characteristics of alloy steel DIN 41Cr4 by shot peening
العناوين الأخرى
تحسين الخواص الميكانيكية للفولاذ السبائكي DIN 41Cr4 بإستخدام تقنية السفع بالكريات
المؤلفون المشاركون
Jayyad, Jumah Salman
Mahmud, Zaynah Shakir
المصدر
العدد
المجلد 26، العدد 7 (31 يوليو/تموز 2020)، ص ص. 1-15، 15ص.
الناشر
تاريخ النشر
2020-07-31
دولة النشر
العراق
عدد الصفحات
15
التخصصات الرئيسية
الموضوعات
الملخص AR
تم دراسة تأثير السفع بالكريات المعدنية بازمان مختلفة على سلوك كلال الانحنائي الدوار و سلوك الاهتزازات للفولاذ السبائكي DIN 41Cr4.
اختبار الصلادة، اختبار الشد، اختبار الكلال ذو السعة الثابتة، و قراءات الاهتزاز تم إجراءها على العينات مع وبدون تشققات في درجة حرارة الغرفة (RT)، وتم رصد سطح الكسر و تحليله بواسطة مجهر الكتروني (SEM).
نتائج الفحص كمنحنيات الإجهاد الى عدد الدورات للوصول الى الفشل(منحنيات (S-N، عامل تحسين مقاومة الكلال يتراوح بين 5% و 10%، وتمت مقارنة النسبة المئوية لتناقص تعجيل تحويل فورييه السريع (FFT) قبل و بعد السفع بالكريات و التي تراوحت بين 25% و 40%.
كل هذة التحسينات حدثت عند السفع لمدة تتجاوز 20دقيقة (20 SPT).
بعد هذا الوقت يميل سلوك الكلال للإنخفاض.
الملخص EN
The effects of shot peening treatment (SPT) were studied at (10, 20, and 30) minutes on the rotating bending fatigue behavior and the behavior of the alloy steel DIN 41Cr4 vibrations.
The hardness test, tensile test, constant amplitude fatigue tests, and the vibration measurements were performed on samples with and without cracks at room temperature (RT), also, the fracture surface was examined and analyzed by a Scanning Electron Microscope (SEM).
The results of the investigations, for example, Stress to Number of cycles to failure (S-N) curves, fatigue strength improvement factor of 5% to 10%, the decreasing percentage of maximum Fast Fourier Transform (FFT) acceleration of the shot-peened condition were compared to untreated conditions ranging between 25% and 40%.
All these improvements occurred for up to 20 minutes of shot peening time (20 SPT), exceeding that time the fatigue behavior tended to decrease due to high roughness and the generation of tensile residual stress.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Mahmud, Zaynah Shakir& Jayyad, Jumah Salman. 2020. Improvement the mechanical characteristics of alloy steel DIN 41Cr4 by shot peening. Journal of Engineering،Vol. 26, no. 7, pp.1-15.
https://search.emarefa.net/detail/BIM-972853
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Mahmud, Zaynah Shakir& Jayyad, Jumah Salman. Improvement the mechanical characteristics of alloy steel DIN 41Cr4 by shot peening. Journal of Engineering Vol. 26, no. 7 (Jul. 2020), pp.1-15.
https://search.emarefa.net/detail/BIM-972853
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Mahmud, Zaynah Shakir& Jayyad, Jumah Salman. Improvement the mechanical characteristics of alloy steel DIN 41Cr4 by shot peening. Journal of Engineering. 2020. Vol. 26, no. 7, pp.1-15.
https://search.emarefa.net/detail/BIM-972853
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 15
رقم السجل
BIM-972853
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر