تحسين خواص الأسطح المصنعة عن طريق الطباعة ثلاثية الأبعاد بتقنية نمذجة ترسيب المنصهر FDM لمنتجات ABS
العناوين الأخرى
Improve surfaces properties of ABS products fabricated by fused deposition modeling (FDM) 3D printing
المؤلفون المشاركون
سليمان إبراهيم يوسف
الإبراهيم، ماهر
الأسعد، محمود
المصدر
مجلة العلوم الهندسية و تكنولوجيا المعلومات
العدد
المجلد 3، العدد 4 (31 ديسمبر/كانون الأول 2019)، ص ص. 42-54، 13ص.
الناشر
تاريخ النشر
2019-12-31
دولة النشر
فلسطين (قطاع غزة)
عدد الصفحات
13
التخصصات الرئيسية
الملخص EN
FDM (fused deposition modeling) 3D printing products often suffer from high surface roughness and low durability compared to conventional methods.
In this paper, the effect of surface treatment after printing and coating with a layer of metal on its properties has been studied, The mechanical surface treatment methods (sandpaper) and chemical (solvent treatment) were compared and their effect on the adhesion strength of the deposited metal layer on the surface.
The surface of the ABS product was coated with a layer of metal, the effect of both treatment and coating on the mechanical properties of printing products was studied.
The results showed a clear decrease in surface roughness after surface treatment, where surface roughness decreased by 92%, and the best result was when grinding with sandpaper (2000 Grit) was Ra 0.35 μm.
The tensile strength after acetone surface treatment was improved by 50% and after coating the product with a layer of metal by 56.25%.
The adhesion test of the surface-deposited metal (CROSS-CUT) was conducted, and the result showed that the best adhesion durability was when the surface was treated with acetone vapor before coating.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
سليمان إبراهيم يوسف والأسعد، محمود والإبراهيم، ماهر. 2019. تحسين خواص الأسطح المصنعة عن طريق الطباعة ثلاثية الأبعاد بتقنية نمذجة ترسيب المنصهر FDM لمنتجات ABS. مجلة العلوم الهندسية و تكنولوجيا المعلومات،مج. 3، ع. 4، ص ص. 42-54.
https://search.emarefa.net/detail/BIM-974542
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
سليمان إبراهيم يوسف....[و آخرون]. تحسين خواص الأسطح المصنعة عن طريق الطباعة ثلاثية الأبعاد بتقنية نمذجة ترسيب المنصهر FDM لمنتجات ABS. مجلة العلوم الهندسية و تكنولوجيا المعلومات مج. 3، ع. 4 (كانون الأول 2019)، ص ص. 42-54.
https://search.emarefa.net/detail/BIM-974542
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
سليمان إبراهيم يوسف والأسعد، محمود والإبراهيم، ماهر. تحسين خواص الأسطح المصنعة عن طريق الطباعة ثلاثية الأبعاد بتقنية نمذجة ترسيب المنصهر FDM لمنتجات ABS. مجلة العلوم الهندسية و تكنولوجيا المعلومات. 2019. مج. 3، ع. 4، ص ص. 42-54.
https://search.emarefa.net/detail/BIM-974542
نوع البيانات
مقالات
لغة النص
العربية
الملاحظات
يتضمن مراجع ببليوجرافية : ص. 53-54
رقم السجل
BIM-974542
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر