Effect of α-Al2O3 nanoparticles addition on some properties of CoCrMo alloy fabricated by powder metallurgy route
العناوين الأخرى
تأثير إضافة الدقائق النانوية من الألومينا على بعض الخواص لسبيكة كوبالت-كروم-مولبدنيوم المصنعة بطريقة ميتالورجيا المساحيق
العنوان الموازي
تأثير إضافة الدقائق النانوية من الألومينا على بعض الخواص لسبيكة كوبالت-كروم-مولبدنيوم المصنعة بطريقة ميتالورجيا المساحيق
المصدر
The Iraqi Journal for Mechanical and Materials Engineering
العدد
المجلد 20، العدد 1 (31 مارس/آذار 2020)، ص ص. 47-62، 16ص.
الناشر
تاريخ النشر
2020-03-31
دولة النشر
العراق
عدد الصفحات
16
التخصصات الرئيسية
الموضوعات
الملخص AR
تستعمل سبائك CoCrMo كمواد إحيائية بسبب مقاومتها الجيدة للتآكل و البلى والتوافقية الجيدة.
و يهدف البحث الحالي إلى تأثير إضافة الدقائق النانوية من الألومينا ) 1 و 3 و 5 (% نسبة وزنية على بعض الخواص لسبيكة كوبالت- كروم- مولبدنيوم المصنعة بطريقة ميتالورجيا المساحيق.
و قد تم قياس المسامية، الكثافة، الصلادة و فحص البنية المجهرية للنماذج المصنعة.
و قد اظهرت النتائج أن إضافة دقائق الألومينا النانوية لها تأثير واضح على الكثافة للنماذج الملبدة، حيث حصلت زيادة مستمرة في المسامية و قد وصلت إلى القيمة القصوى عند اضافة 5% الومينا.
بينما أبدت الكثافة سلوك مغاير للمسامية مع زيادة نسبة الألومينا.
و قد انخفضت قيمة الصلادة مع زيادة نسبة الألومينا المضافة إلى السبيكة.
و قد اظهرت الصور المجهرية المأخوذة بالمجهر الماسح مع توزيع العناصر بالمجهر الماسح ) SEM-Mapping ( حصول انعزال جزئي لدقائق سبيكة الكوبالت- كروم- مولبدنيوم بإضافة دقائق الألومينا مع تكوين طبقة أوكسيدية واقية من اوكسيد الكروم( Cr2O3 (.
و قد اظهرت نتائج التحليل XRD وجود الاطوار γ-Co و ε-Co و Cr2O3 و على الرغم من زيادة المسامية مع زيادة نسبة الالومينا و لكن هذا سوف يساعد على نمو نسيج الجسم مع المواد المركبة النانوية المصنعة كمواد احيائية.
الملخص EN
CoCrMo alloys are used as biomaterial due to their good corrosion and wear resistance, with reasonable biocompatibility.
The present study aims to investigate the effect of (1, 3 and 5) wt% α-Al2O3 nanoparticle additions on some properties of pre-alloyed CoCrMo when fabricated by powder metallurgy route.
The density, porosity, microhardness and microstructure of the fabricated samples were examined.
The results revealed that the addition of α-Al2O3 nanoparticle has a distinguished effect on the density of sintered CoCrMo alloy samples, where continues increase in the porosity was happened and reached to its maximum value at the higher addition amount.
While the density showed an inverse trend to that of the porosity with the increasing of the nanoparticle addition.
The microhardness was decreased as the amount of the nanoparticle addition to CoCrMo alloy was increased.
The microstructure observation by SEM and SEM-Mapping is revealed the partial isolation of CoCrMo particles by the nanoparticle additions and it was associated with the formation of passive Cr2O3 oxide.
In turn the XRD analysis depicted the co-existence of γ-Co and ε-Co phases besides, the Cr2O3 oxide.
Although the increased porosity with the nanoparticle addition but, this will perhaps, increase the tissue ingrowth when the fabricated nanocomposites were utilized as biomaterial
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Abbas, Muna Khudayr& Yaqub, Jawdat Ali. 2020. Effect of α-Al2O3 nanoparticles addition on some properties of CoCrMo alloy fabricated by powder metallurgy route. The Iraqi Journal for Mechanical and Materials Engineering،Vol. 20, no. 1, pp.47-62.
https://search.emarefa.net/detail/BIM-975874
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Abbas, Muna Khudayr& Yaqub, Jawdat Ali. Effect of α-Al2O3 nanoparticles addition on some properties of CoCrMo alloy fabricated by powder metallurgy route. The Iraqi Journal for Mechanical and Materials Engineering Vol. 20, no. 1 (Mar. 2020), pp.47-62.
https://search.emarefa.net/detail/BIM-975874
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Abbas, Muna Khudayr& Yaqub, Jawdat Ali. Effect of α-Al2O3 nanoparticles addition on some properties of CoCrMo alloy fabricated by powder metallurgy route. The Iraqi Journal for Mechanical and Materials Engineering. 2020. Vol. 20, no. 1, pp.47-62.
https://search.emarefa.net/detail/BIM-975874
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 59-62
رقم السجل
BIM-975874
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر