بحثتصفح
بحث متقدم

بحث متقدم

محددات البحث

محددات الوثيقة

العبارة
تقييد النتائج
نوع البيانات
اللغة
الدولة
المصدر

نتائج البحث

   (101 - 150 من 486)
مقالات

Design and Assessment of a Lightweight Polymer Concrete Utility Manhole

By: Leonardi, Luciano; Pique, Teresa M.; Yao, Zhonghua…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

Mode I Fracture Toughness Test and Fractal Character of Fracture Trajectory of Red Sandstone under Real-Time High Temperature

By: Zejin, Yang; Lesiuk, Grzegorz; Zhang, Changsuo. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-13, 13 p.

مقالات

Marginal and Internal Adaptation Evaluation of Dental Composites Using Micro-CT

By: Stan, Adrian Tudor; Negrutiu, Meda Lavinia; Sinescu, Cosmin…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-6, 6 p.

مقالات

Study on Cumulative Damage Law of Stainless Steel-Reinforced Concrete Columns under Step Impact Loading

By: Wu, Bo; Zhang, Guoxue; Balitskii, Alexander…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Self-Designed Hydrophilicity-Related Geomaterials and Their Testing Utility in Simulation of Overlying Strata Instability

By: Zha, Hao; Liu, Weiqun; Nicolais, Luigi…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

مقالات

A Comprehensive Review of the Mechanical Behavior of Suspension Bridge Tunnel-Type Anchorage

By: Han, Yafeng; Liu, Xinrong; Correia, José A. F. O.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-19, 19 p.

مقالات

Hydrogen Effect on Cumulation of Failure, Mechanical Properties, and Fracture Toughness of Ni-Cr Alloys

By: Balitskii, Alexander; Heidarzadeh, Akbar; Ivaskevich, Ljubomyr. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Synthesis of Silver Nanoparticles Using Orange Peel Extract Prepared by Plasmochemical Extraction Method and Degradation of Methylene Blue under Solar Irradiation

By: Skiba, Margarita I.; Nicolais, Luigi; Vorobyova, Victoria I.. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Research into Correlation between the Lubrication Mode of Contact Surfaces and Dynamic Parameters of Turbo-Generator Transmissions

By: Kočiško, Marek; Baron, Petr; Dymek, Stanislaw…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-10, 10 p.

مقالات

Deformation and Failure Characteristics of Soil-Rock Mixture considering Material Composition and Random Structure

By: Wang, Shengnian; Ji, Tingting; Nicolais, Luigi…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-13, 13 p.

مقالات

Analysis on Fracture Toughness of the L360QSN08825 Bimetallic Composite Pipe Welded Joint

By: Wang, Bin; Lan, Hongxia; Lei, Bobo…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-13, 13 p.

مقالات

Corrigendum to “Relationship between Color CIEL∗a∗b∗ and Total Organic Carbon in Compost”

By: Palechor-Tróchez, Jhon Jairo; Ordoñez Santos, Luis Eduardo; Villada-Castillo, Hector Samuel. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-1, 1 p.

مقالات

Determination of Gradation of Recycled Mixed Coarse Aggregates for Pavement Base or Subbase by Crushing Fractals

By: Li, Jianjun; Pei, Yong; Caggiano, Antonio…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

مقالات

Modeling of the Growth Kinetics of Boride Layers in Powder-Pack Borided ASTM A36 Steel Based on Two Different Approaches

By: Ortiz-Domínguez, M.; Gómez-Vargas, O. A.; Pia, Giorgio…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

A More Realistic Study on the Mechanical Properties of CFRC Composite Grouting Material under a Long-Term Water Immersion Process

By: Xiao, Yao; Deng, Huafeng; Li, Jian-Lin…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

مقالات

Driving Comfort Evaluation for Manhole Covers and Pavement around Manholes

By: Zhao, Quanman; Li, Zhigang; Ruffino, F.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-10, 10 p.

مقالات

The Effects of Fiber Length and Volume on Material Properties and Crack Resistance of Basalt Fiber Reinforced Concrete (BFRC)‎

By: Mosallam, Ayman; Li, Chuanxi; Criado, M.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-17, 17 p.

مقالات

Reinforcement Effects of Isolation Piles on the Adjacent Existing Tunnel in Building Construction

By: Yao, Aijun; Guo, Yanfei; Guo, Haifeng…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-21, 21 p.

مقالات

Development of a Prestressing CFRP Laminate Anchorage System and Bridge Strengthening Application

By: Li, Fangyuan; Santulli, Carlo; Shen, Yin…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Antiageing Performance Evaluation of Recycled Engine Oil Bottom Used in Asphalt Rejuvenation

By: Yu, Miaozhang; Li, Jin; Liu, Quantao…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Study on Constitutive Characteristic of As-Cast AA6061 Alloy under Plane Strain Compression Based on Orthogonal Analysis

By: Qin, Fangcheng; Qi, Hui-Ping; Prahl, Ulrich…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

مقالات

Elliptical Method for Damage Identification in Carbon Fibre Reinforced Polymer Laminates

By: Amafabia, Daerefa-a Mitsheal; Montalvão, Diogo; Balitskii, Alexander…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Elastic-Plastic Behavior of Compacted Loess under Direct and Cyclic Tension

By: He, Shixin; Luo, Zhiping; Bai, Haibo. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

A Method for Making Transparent Hard Rock-Like Material and Its Application

By: Ge, Jin-jin; Pirri, Candido F.; Xu, Ying. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-14, 14 p.

مقالات

Effect of Blending Degree between Virgin and Aged Binder on Pavement Performance of Recycled Asphalt Mixture with High RAP Content

By: Xu, Ying; Chou, Zhijing; Ji, Jie…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-15, 15 p.

مقالات

Corrigendum to “High- and Low-Temperature Properties and Thermal Stability of Silica FumeSBS Composite-Modified Asphalt Mortar”

By: Kai, Cao; Wenyuan, Xu; Dan, Chen…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-3, 3 p.

مقالات

Fracture of Parallel Strand Bamboo Composite under Mode I Loading: DCB Test Investigation

By: Shen, Yurong; Huang, Dongsheng; Lesiuk, Grzegorz…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-10, 10 p.

مقالات

Experimental Study on Seismic Strengthening of Confined Masonry Walls Using RPC

By: Wang, Xin; Li, Shuming; Palcut, Marián…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-13, 13 p.

مقالات

Strain Effects on the Band Gap and Diameter of CdSe Core and CdSeZnS CoreShell Quantum Dots at Any Temperature

By: Karim, Md. Rezaul; Balaban, Mesut; De Stefano, Luca…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-10, 10 p.

مقالات

Mechanical Recovery of Cracked Fiber-Reinforced Mortar Incorporating Crystalline Admixture, Expansive Agent, and Geomaterial

By: Buller, Abdul Salam; Lee, Kwang-Myung; Giorgio, Ivan…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-14, 14 p.

مقالات

Factors Influencing the Rheological Properties of MRSP Based on the Orthogonal Experimental Design and the Impact Energy Test

By: Liu, Bing; Du, Cheng-bin; Koshy, P.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

مقالات

One-Time Roll-Forming Technology for High-Strength Steel Profiles with “日” Section

By: Liang, Jicai; Li, Yi; Palumbo, Gianfranco…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-10, 10 p.

مقالات

Development and Performance Test including Mechanical and Thermal of New Tenon Composite Block Masonry Walls

By: Wu, Dong-yue; Shen, Mengying; Pia, Giorgio…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

مقالات

Tea Stem as a Sorbent for Removal of Methylene Blue from Aqueous Phase

By: Lee, Tzan-Chain; Ko, Tzu-Hsing; Yen, Y.-W.…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-15, 15 p.

مقالات

Optimisation of Cutting Tool and Cutting Parameters in Face Milling of Custom 450 through the Taguchi Method

By: Gokce, Harun; Riveiro, Antonio. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-10, 10 p.

مقالات

Numerical Study of Particle Morphology Effect on the Angle of Repose for Coarse Assemblies Using DEM

By: Chen, Jing; Gao, Rui; Zhu, Hongtao…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-15, 15 p.

مقالات

Control Design of the Wave Compensation System Based on the Genetic PID Algorithm

By: Zhou, Mingjian; Wang, Yuqin; Wu, Haibing…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-13, 13 p.

مقالات

Chelating Effect of Cellulose Acetate Hydrogel Crosslinked with EDTA Dianhydride Used as a Platform for Cell Growth

By: Motta, Adriana Cristina; Duek, Eliana Aparecida de Rezende; Catauro, Michelina…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

مقالات

Evaluation of Compression Performance of APM Aluminum Foam-Polymer Filled Pipes Prepared via Different Epoxy Resin Bonding Processes

By: Wang, Yanli; Guo, Qiaoyu; Foti, Dora…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-10, 10 p.

مقالات

Dynamic Behavior of Self-Piercing Riveted and Mechanical Clinched Joints of Dissimilar Materials: An Experimental Comparative Investigation

By: Ge, Yulong; Haque, Rezwanul; Xia, Yong. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

Study on the Mitigative Effect of Controlled Permeable Formwork (CPF)‎ Liner on Early-Age Shrinkage of Box-Girder Concrete

By: Ye, Jianxiong; Yu, Linwen; Nicolais, Luigi…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-8, 8 p.

مقالات

Three-Point Bending Fatigue Test of TiAl6V4 Titanium Alloy at Room Temperature

By: Belan, Juraj; Kuchariková, Lenka; Rozumek, Dariusz…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

مقالات

Characterization of Layer Number of Two-Dimensional Transition Metal Diselenide Semiconducting Devices Using Si-Peak Analysis

By: Zhang, Xian; Li, Xi-Bo. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-7, 7 p.

مقالات

Mechanical Properties of Paste Slurry under Constant Shear Rate in Initial Structure Failure Process

By: Dai, Chaoqun; Wu, Aixiang; Nicolais, Luigi…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Optimization of Magnesium Alloy Wheel Dynamic Impact Performance

By: Jiang, Xin; Ju, D. Y.; Lee, Joon-Hyung…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-12, 12 p.

مقالات

Luminescence Nanothermometry Based on Pr3+ : LaF3 Single Core and Pr3+ : LaF3LaF3 CoreShell Nanoparticles

By: Korableva, S. L.; Kiiamov, A. G.; Luo, Zhiping…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-14, 14 p.

مقالات

Numerical Simulation Virtual Test of Torsion Shear for Asphalt Mixture

By: Xie, Jun; Nicolais, Luigi; Yang, Yougang. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-21, 21 p.

مقالات

An Estimation of the Thermal Properties of Pu-Rich Metallic Fuel

By: Odaira, Naoya; Arita, Yuji; Basnet, Pradip. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-7, 7 p.

مقالات

Effect of Variable Thermal Conductivity on the Generalized Thermoelasticity Problems in a Fiber-Reinforced Anisotropic Half-Space

By: Xiong, Chunbao; Yu, Li-Na; Kłosowski, Paweł…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-9, 9 p.

مقالات

Properties and Components of Recycled Engine Oil Bottom Rejuvenated Asphalt and Its Grey Relationship Analysis

By: Li, Jin; Yu, Miaozhang; Norambuena-Contreras, Jose…[et al.]. Advances in Materials Science and Engineering. No. 2019 (2019), pp.1-11, 11 p.

© 2024 عالم المعرفة للمحتوى الرقمي. جميع الحقوق محفوظة.