بحثتصفح
بحث متقدم

بحث متقدم

محددات البحث

محددات الوثيقة

العبارة
تقييد النتائج
التخصصات الرئيسية
نوع البيانات
اللغة
الدولة
المؤلفين / الأشخاص
المصدر
المؤسسة
الموضوعات

نتائج البحث

   (551 - 600 من 797)
مقالات

The effect of substrate temperature on the physical properties of spray pyrolysed CdS thin films

By: al-Dabbagh, Thamir Abbud Abbas Najm; Jafar, A. O.. al-Tarbiyah wa-al-Ilm : Majallat ilmiyah lil-Buhuth al-Ilmiyah al-Asasiyah. Vol. 25, no. 4 (2012), pp.77-85, 9 p.

Subjects: Physical properties; Temperatures

مقالات

The influence of the temperature on the ultimate tensile strength of the composite materials at constant fiber volume fraction

By: al-Alkawi, Husayn Jasim Muhammad; al-Fattal, Zafir Sadiq; Ali, Abd al-Jabbar Husayn. Engineering and Technology Journal. Vol. 30, no. 11 (2012), pp.1935-1947, 13 p.

Subjects: Composite materials; Temperatures

مقالات

Effet des traitements thermiques d’appertisation sur la qualite biochimique, nutritionnelle et technologique du simple, double et triple concentre de tomate

By: Boumendjel, M.; Houhamdi, M.; Samar, M. F.…[et al.]. Sciences et Technologie : Sciences de la Nature et de la Vie. No. 36 (Dec. 2012), pp.51-59, 9 p.

Subjects: Canned tomatoes; Temperatures; Tomatoes

تقرير إحصائي

Climate. Average monthly minimum, maximum and general air temperatures (co) at Amman civil airport, and Dair Alla 2000 and 2012.

Statistical Yearbook. Jordan.; Department of Statistics No. 63 (2012), pp.3-3, 1 p.

Subjects: Statistics; Temperatures

مقالات
1
عدد الاستشهادات
في قاعدة ارسيف

Calcul des concentrations de molécules et de radicaux lors de déposition de couches minces a-Si : H par procédés PECVD

By: Babahani, O.; Khalafawi, F.. Annales des Sciences et Technologie. Vol. 4, no. 2 (Nov. 2012), pp.115-120, 6 p.

Subjects: Temperatures

مقالات

Preparation and characterization ZnO nanoparticles and study of morphology at high temperature

By: Khudayr, Mundhir Abd al-Hasan. Iraqi Journal of Physics. Vol. 10, no. 18 (2012), pp.17-23, 7 p.

Subjects: Optical properties; Temperatures; Zinc oxide

مقالات

Genetic algorithm based tuning of fixed bias PID controller for a nonlinear constant temperature water bath under load disturbances

By: Mittal, Avneesh; Kapoor, Avinashi; Saxena, T. K.. Journal of Automation and Systems Engineering. Vol. 6, no. 3 (Sep. 2012), pp.96-109, 14 p.

Subjects: Algorithms; Computing; Measurement; Temperatures

مقالات

Atmospheric effects on sound waves propagation

By: Mahdi, Zahra Salah; al-Jumayli, Qays Jamil. Iraqi Journal of Science. Vol. 53, no. 3 (2012), pp.689-692, 4 p.

Subjects: Meteorology; Sound-waves; Temperatures; Acoustics; Atmospheric temperature

مقالات

Performance evaluation of interlocking paving units in aggressive environments

By: al-Nuhi, Hanan A.; Zaydan, Sayyidah Rifai Rawwash. Housing and Building National Research Center Journal. Vol. 8, no. 2 (2012), pp.81-90, 10 p.

Subjects: Aggressiveness; Environmental aspects; Temperatures

مقالات

Effect of fire flame (high temperature)‎ on the behaviour of axially loaded reinforced SCC short columns

By: Izzat, Amir Faruq. Journal of Engineering. Vol. 18, no. 8 (Aug. 2012), pp.889-904, 16 p.

Subjects: Concrete columns; Temperatures; Concrete

مقالات

Effet de la température sur l’évolution des fruits chez quelques variétés du palmier dattier (phoenix dactylifera L.)‎

By: Babahani, Suad; Eddoud, Abd al-Ghani. Algerian Journal of Arid Environment. Vol. 2, no. 1 (Jun. 2012), pp.36-41, 6 p.

Subjects: Algeria; Ouargla (State); Temperatures; Physiology

مقالات

Climate change and animals in Saudi Arabia

By: Shubrak, Muhammad; Arif, Ibrahim Abd al-Wahid; Khan, Hasib Ahmad…[et al.]. Saudi Journal of Biological Sciences. Vol. 19, no. 2 (2012), pp.121-130, 10 p.

Subjects: Wild animals; Climatic changes; Ecology; Global warming; Temperatures

مقالات

Effect of high standard of temperature on the hardened needled concrete

By: Ali, Asma Mahmud. Jordan Journal of Civil Engineering. Vol. 6, no. 2 (2012), pp.222-233, 12 p.

Subjects: Reinforced concrete; Temperatures; Concrete

مقالات

Potential reuse of electric-arc furnace dust (EAFD)‎ in concrete

By: Alqam, Maha. Jordan Journal of Civil Engineering. Vol. 6, no. 2 (2012), pp.174-185, 12 p.

Subjects: Temperatures; Concrete

مقالات

Effect of annealing temperature on the structural and optical properties of the CdO thin films prepared by vacuum evaporation thermal technique

By: Makki, Samir Ata; Mustafa, Mustafa Qahtan. Ibn al-Haitham Journal for Pure and Applied Science. Vol. 25, no. 1 (2012), 8 p.

Subjects: Mechanical properties; Optical properties; Temperatures

مقالات

Warm forming of aluminum alloy 2024 at different temperatures

By: Ali, Walid Jalal; Jumah, Umar Dhannun. al-Rafidain Engineering Journal. Vol. 20, no. 2 (Mar. 2012), pp.78-85, 8 p.

Subjects: Aluminum alloys; Temperatures

مقالات

Studying the effect of temperature on the buckling load of laminated composite plate under different boundary conditions

By: Ahmad, Nisrin H.; Mahdi, Hasan H.; Husayn, Ammar A.. The Iraqi Journal for Mechanical and Materials Engineering. Vol. 12, no. 1 (2012), pp.880-896, 17 p.

Subjects: Composite materials; Mechanical properties; Temperatures

مقالات

Effect of salinity, temperature, nutrients and CO2 on growth of two species of microalgae from Red Sea, Saudi Arabia

By: al-Adali, Khalid; Ahmad, Ihab; Kumar, Pradeep…[et al.]. Journal of King Abdul Aziz University : Marine Science. Vol. 23, no. 1 (2012), pp.57-73, 17 p.

Subjects: Red Sea; Salts; Saudi Arabia; Temperatures

مقالات

Temperature effect on frictional properties of HMA at different polishing stages

By: Khasawinah, Muhammad A.; Liang, Robert Y.. Jordan Journal of Civil Engineering. Vol. 6, no. 1 (2012), pp.39-53, 15 p.

Subjects: Brakes; Friction; Temperatures

مقالات

Effects of chrome lignosulfonate concentration and temperature on compressive strength of cement class G used in oil well cementing

By: al-Saidi, Jamal Harbi Husayn. Journal of Thi-Qar Science. Vol. 3, no. 2 (Feb. 2012), pp.76-84, 9 p.

Subjects: Temperatures

مقالات

Effects of calcination and activation temperature on dry reforming catalysts

By: al-Fatish, A. S. A.; Fakihah, A. H.. Journal of Saudi Chemical Society. Vol. 16, no. 1 (Jan. 2012), pp.55-61, 7 p.

Subjects: Temperatures

مقالات

Synthesize nano ZnO-ZrO2 composite by combustion method and studying their dielectric properties

By: Chyad, Fadil A.. Engineering and Technology Journal. Vol. 30, no. 8 (2012), pp.1342-1350, 9 p.

Subjects: Temperatures; Zinc; Zinc oxide

مقالات

The effect of annealing on the physical properties of thermally evaporated cadmium sulphide thin films

By: Jamil, Shatha Shammun Batrus. Engineering and Technology Journal. Vol. 30, no. 5 (2012), pp.886-896, 11 p.

Subjects: Optical properties; Temperatures

مقالات
1
عدد الاستشهادات
في قاعدة ارسيف

Temperature variability over Saudi Arabia and its association with global climate indices

By: al-Mazrui, Mansur Atiah Muhammad. Journal of King Abdul Aziz University : Meteorology, Environment and Arid land Agriculture Sciences. Vol. 23, no. 1 (2012), pp.85-108, 24 p.

Subjects: Saudi Arabia; Climate; Temperatures

مقالات

The temperature effect on the viscosity and density ofxanthan gum solution

By: Diya, Ahmad Hasan. Kufa Journal of Engineering. Vol. 3, no. 2 (2012), pp.17-30, 14 p.

Subjects: Temperatures

مقالات
3
عدد الاستشهادات
في قاعدة ارسيف

Effect of temperature on fatigue transition life and strength of aluminum alloy

By: Muhaysin, Abd al-Muhsin N.; Husayn, Hamid A.; al-Alkawi, Husayn Jasim Muhammad. Engineering and Technology Journal. Vol. 30, no. 6 (2012), pp.1058-1065, 8 p.

Subjects: Aluminum alloys; Temperatures

مقالات
1
عدد الاستشهادات
في قاعدة ارسيف

Experimental study on the effect of temperature on the fatigue endurance limit of two al alloys

By: al-Saraf, Sad Abbas. Engineering and Technology Journal. Vol. 30, no. 6 (2012), pp.1048-1057, 10 p.

Subjects: Aluminum alloys; Temperatures

رسائل جامعية

Slope plate casting of hypereutectic al-sialloy

By: Abd, Usamah Ibrahim. Master; University of Technology; 2011

Subjects: Alloys; Temperatures

مقالات

Effect of cooling rate on mechanical properties of eutectic and hypoeutectic al-si alloys

By: Kazim, Ziyad D.. Journal of Engineering. Vol. 17, no. 6 (Dec. 2011), pp.1576-1583, 8 p.

Subjects: Alloys; Mechanical properties; Temperatures

مقالات

Poisson's ratio as a function of time in composite material of viscoelastic behavior by depending on creep test

By: Ameed, Azhar Sabah. Engineering and Technology Journal. Vol. 29, no. 3 (2011), pp.488-498, 11 p.

Subjects: Composite materials; Temperatures

مقالات

Residual mechanical properties of self-compacting concrete exposed to elevated temperatures

By: Ali, Manolia Abd al-Wahhab. Engineering and Technology Journal. Vol. 29, no. 7 (2011), pp.1386-1399, 14 p.

Subjects: Mechanical properties; Temperatures; Concrete

مقالات

Behavior of plain and high performance polypropylene fiber concrete subjected to elevated temperatures

By: Zghair, Luma Abd al-Ghani. Engineering and Technology Journal. Vol. 29, no. 8 (2011), pp.1517-1535, 19 p.

Subjects: Mechanical properties; Temperatures; Concrete

مقالات

Effect of thermal annealing and laser radiation on the optical properties of AgAlS2 thin films

By: al-Jumayli, Hamid Nasir; al-Rawi, Ahmad Khalil. Iraqi Journal of Physics. Vol. 9, no. 16 (2011), pp.79-83, 5 p.

Subjects: Optical properties; Salts; Temperatures

أوراق مؤتمرات

Substrate effect temperature on Cu2ZnSnS4 thin films deposited by ultrasonic technique

By: Daranfed, W.; Fassi, R.; Ayidah, M. S.…[et al.]. . International Conference on New Materials and Active Devices (1st : 2011 : Umm al-Bawaqi, Algeria) Journal of New Technology and Materials. Vol. 1, no. 00 (Dec. 2011), pp.44-46, 3 p.

Subjects: Temperatures

مقالات

Influence of ambient temperature on stiffness of asphalt paving materials

By: Hamid, M. H.; Makki, Maryam S.. Journal of Engineering. Vol. 17, no. 5 (Oct. 2011), pp.1090-1108, 19 p.

Subjects: Temperatures

مقالات

Residual elasto-plastic stresses analysis of polymeric thick-walled pressurized cylinder

By: Amin, Hani Aziz; Abbud, Ahmad Hadi; Muhsin, Athir Zaki. The Iraqi Journal for Mechanical and Materials Engineering. Vol. 11, no. 3 (2011), pp.405-416, 12 p.

Subjects: Temperatures

مقالات

Preparation of tin using wet method

By: Qasir, Nahid Wadi; al-Mukhtar, Muhammad Nizar; Jarallah, Areej Ali…[et al.]. Ibn al-Haitham Journal for Pure and Applied Science. Vol. 24, no. 3 (2011), 10 p.

Subjects: Temperatures; Minerals

مقالات

The factors affecting metacercarial production of fasciola gigantica from lymnaea auricularia snail

By: al-Juburi, Muayyad Mujbil Ubayd; al-Mayyah, Subayh Hulayyil; Hassan, Hadi Raswl. Journal of Basrah Researches : Sciences. Vol. 37, no. 4E (Sep. 2011), pp.9-16, 8 p.

Subjects: Snails; Temperatures

مقالات

Mathematical models for prediction of some mechanical properties of concrete exposed to burning

By: Kazim, Muhammad Mansur; al-Quzwini, Sayf Salah; Allush, Ali Abd al-Amir. Journal of Babylon University : Journal of Applied and Pure Sciences. Vol. 19, no. 3 (2011), 19 p.

Subjects: Mechanical properties; Temperatures; Concrete

مقالات

Effect of fire flame exposure on some properties of fiber reinforced high strength concrete

By: Karim, Muna Muhammad. Journal of Babylon University : Journal of Applied and Pure Sciences. Vol. 19, no. 3 (2011), pp.1184-1197, 14 p.

Subjects: Temperatures

مقالات

The effect of heat treatment temperatures (annealing, aging and double aging)‎ on hardness of 16 % Ni cast maraging steels

By: Radi, Munthir Muhammad. The Iraqi Journal for Mechanical and Materials Engineering. Vol. 11, no. 2 (2011), 25 p.

Subjects: Steel alloys; Temperatures

مقالات

The role of annealing temperature on the optical properties of thermally deposited CdTe films

By: Ilyas, Mahasin Faysal Ahmad; al-Duri, Ala Ahmad Jumah; al-Najjar, Abd Allah Abd al-Aziz…[et al.]. Iraqi Journal of Physics. Vol. 9, no. 15 (2011), pp.18-23, 6 p.

Subjects: Optical properties; Temperatures

مقالات

Simulation of boiler drum wall temperature differential and its estimation

By: Saed, Waladin K.; Ulaywi, Bushra Kazim. Iraqi Journal of Computer, Communications and Control Engineering. Vol. 11, no. 1 (Jun. 2011), pp.62-73, 12 p.

Subjects: Temperatures

مقالات

Theoretical analysis of temperature distribution in friction stir welding

By: Doos, Qasim M.; Zaydan, Ahmad; Hasan, Hasan R.. Journal of Engineering. Vol. 17, no. 3 (Jun. 2011), pp.6784-6799, 16 p.

Subjects: Aluminum alloys; Temperatures; Welding

مقالات

Finite element prediction of temperature rise distribution in turning process of AISI 1045 carbon steel

By: al-Qawi, Asma A.; Yasin, Sana Jafar; Rana L.. Thi-Qar University Journal for Engineering Sciences. Vol. 2, no. 2 (May. 2011), pp.52-69, 18 p.

Subjects: Measurement; Temperatures

مقالات

Structural and electrical properties dependence on annealing temperature of A-GE : SB C-SI heterojunction

By: Shahab, Aliyah Abd al-Muhsin; al-Lami, Husayn Khazal Rashid; Mustafa, Muhammad Hamid. Ibn al-Haitham Journal for Pure and Applied Science. Vol. 24, no. 1 (2011), 7 p.

Subjects: Annealing of metals; Mechanical properties; Temperatures; Minerals

مقالات

The effect of temperature on the dielectric strength of BaTiO3 ceramic

By: Yasin, Jasim Muhammad. College of Basic Education Researches Journal. Vol. 10, no. 3 (Mar. 2011), pp.604-614, 11 p.

Subjects: Temperatures

تقرير إحصائي

Table 5. 1. 71, Average monthly minimum, maximum and general Air temperature (C°) at Amman Civil Airport, and Dair Alla Stations, 2000 and 2010.

Agricultural statistics Jordan.; Department of Statistics Vol. (2010), pp.70-70, 1 p.

Subjects: Statistics; Temperatures

مقالات

The effect of temperature on phase transition pressure of zinc-blende boron nitride

By: Majbal, Z. Y.. Journal of Babylon University : Journal of Applied and Pure Sciences. Vol. 18, no. 4 (2010), 6 p.

Subjects: Temperatures; Zinc

مقالات

Experimental studies on the fire endurance of reinforced concrete beams

By: Kazim, Muhammad Mansur; Ulwan, Nada Mahdi Fawzi; al-Khalidi, Khalid Safa Hashim. Journal of Babylon University : Journal of Applied and Pure Sciences. Vol. 18, no. 4 (2010), 14 p.

Subjects: Mechanical properties; Temperatures; Concrete

© 2024 عالم المعرفة للمحتوى الرقمي. جميع الحقوق محفوظة.