Fabrication of copper-graphite MMCs using powder metallurgy technique
Other Title(s)
تصنيع مادة النحاس المتراكب المدعم بحبيبات الكرافيت باستخدام تقنية تكنولوجيا المساحيق
Joint Authors
Husayn, Muhammad Khazal
Sabah, Nur Fadil Adhra
Jamil, Wala Wadi
Source
Issue
Vol. 24, Issue 10 (31 Oct. 2018), pp.49-59, 11 p.
Publisher
University of Baghdad College of Engineering
Publication Date
2018-10-31
Country of Publication
Iraq
No. of Pages
11
Main Subjects
Abstract EN
Copper, and its, alloys and composites (being the matrix), are broadly used in the electronic as well as bearing materials due to the excellent thermal and electrical conductivities it has.
In this study, powder metallurgy technique was used for the production of copper graphite composite with three volume perc ent of graphite.
Processing parameters selected is (900) °C sintering temperature and (90) minutes holding time for samples that were heated in an inert atmosphere (argon gas).
Wear test results showed a pronounced improvement in wear resistance as the percent of graphite increased which acts as solid lubricant (where wear rate was decreased by about 88% as compared with pure Cu).
Microhardness and compressive strength increased (about 8% and 16%, for each of them) and reached to the maximum values at 1% graphite percentage as compared with pure Cu, then it decreased after that critical graphite concentration.
Microstructure test indicated that the dark region in the copper matrix was increased as the percent of graphite increased and the reinforcement particles were homogeneously distributed which means that the powder metallurgy technique is suitable for such task.
American Psychological Association (APA)
Husayn, Muhammad Khazal& Jamil, Wala Wadi& Sabah, Nur Fadil Adhra. 2018. Fabrication of copper-graphite MMCs using powder metallurgy technique. Journal of Engineering،Vol. 24, no. 10, pp.49-59.
https://search.emarefa.net/detail/BIM-840588
Modern Language Association (MLA)
Husayn, Muhammad Khazal…[et al.]. Fabrication of copper-graphite MMCs using powder metallurgy technique. Journal of Engineering Vol. 24, no. 10 (Oct. 2018), pp.49-59.
https://search.emarefa.net/detail/BIM-840588
American Medical Association (AMA)
Husayn, Muhammad Khazal& Jamil, Wala Wadi& Sabah, Nur Fadil Adhra. Fabrication of copper-graphite MMCs using powder metallurgy technique. Journal of Engineering. 2018. Vol. 24, no. 10, pp.49-59.
https://search.emarefa.net/detail/BIM-840588
Data Type
Journal Articles
Language
English
Notes
Includes appendices : p. 55-59
Record ID
BIM-840588