Biomechanical Analysis of a Growing Rod with Sliding Pedicle Screw System for Early-Onset Scoliosis

Abstract EN

Early-onset scoliosis (EOS) remains a challenging condition for which current nonfusion surgeries require iterative lengthening surgeries.

A growing rod with sliding pedicle screw system (GRSPSS) was developed to treat spinal deformities without repeated operative lengthening.

This study was performed to evaluate whether GRSPSS had similar stability as a conventional pedicle screw system to maintain deformity correction.

A serial-linkage robotic manipulator with a six-axis load cell positioned on the end-effector was utilized to evaluate the mechanical stability of the GRSPSS versus conventional fixed scoliosis instrumentation.

Ten skeletally mature thoracic female Katahdin sheep spines (T4-L1) were subjected to 2.5 Nm of flexion-extension (FE), lateral bending (LB), and axial rotation (AR) in 2° increments for each state.

The overall range of motion (ROM), apical segment ROM, and stiffness were calculated and reported.

A two-tailed paired t-test was used to detect significant differences (p<0.05) between the fixed group and GRSPSS fixation.

There were no significant differences in overall range of motion (ROM), apical segment ROM, or stiffness for FE or LB between the GRSPSS group and fixed group.

In AR, the GRSPSS group showed increased ROM compared to the fixed group for the overall spine (36.0° versus 19.2°, p<0.01) and for the instrumented T8-T10 segments (7.0° versus 2.9°, p=0.02).

Similarly, the fixed rod elastic zone (EZ) stiffness was significantly greater than the GRSPSS EZ stiffness (0.29 N/m versus 0.17 N/m, p<0.001).

The space around the rod allows for the increased AR observed with the GRSPSS fusion technique and is necessary for axial growth.

The GRSPSS fusion model shows equivalent flexion and LB stability to current fusion models and represents a stable fusion technique and may allow for longitudinal growth during childhood.