Investigation of optical injection locking model
Other Title(s)
تحقيق نموذج قفل الحقن البصرية
Dissertant
Tanin, Abd al-Salam Mansur Ahmad
Thesis advisor
University
Mutah University
Faculty
Faculty of Engineering
Department
Electrical Engineering Department
University Country
Jordan
Degree
Master
Degree Date
2017
English Abstract
Optical injection locking can be used as a path to minimize cost, complexity, and size of fiber-optic communications.
A rate equations of semiconductor laser based model is usually used to describe the interaction between photons and carriers inside a laser cavity.
When an additional light source is injected into the cavity, the system preserves the general form of the original equations.
Optical injection locking for semiconductor lasers provides beneficial applications not achievable through the free-running lasers and offers preferable performance over free-running lasers.
In this thesis, investigation of optical injection locking for semiconductor lasers are presented and analyzed in various aspects.
Locking range and stability of semiconductor lasers under optical injection locking are simulated and analyzed.
The effects of both the linewidth enhancement factor and coupling rate on the rate equations of laser under injection locking are investigated and analyzed.
The small signal frequency response of injection-locked lasers is analyzed.
Moreover, frequency response versus different wavelength detuning at fixed injection ratio is presented and discussed, and optical spectra is simulated and analyzed at four detuning conditions.
Finally, frequency response versus different injection ratios, for fixed detuning wavelength, is introduced and analyzed.
It's found that there are many benefits of optical injection locking from than the free running of semiconductor laser such as enhancement the frequency response, large modulation bandwidth, high data rate, low signal distortion, and low link loss.
Main Subjects
Telecommunications Engineering
No. of Pages
50
Table of Contents
Table of contents.
Abstract.
Abstract in Arabic.
Chapter One : Introduction.
Chapter Two : Injection locking theory : model and analysis.
Chapter Three : Results and discussions.
Chapter Four : Conclusion and future work.
References.
American Psychological Association (APA)
Tanin, Abd al-Salam Mansur Ahmad. (2017). Investigation of optical injection locking model. (Master's theses Theses and Dissertations Master). Mutah University, Jordan
https://search.emarefa.net/detail/BIM-780422
Modern Language Association (MLA)
Tanin, Abd al-Salam Mansur Ahmad. Investigation of optical injection locking model. (Master's theses Theses and Dissertations Master). Mutah University. (2017).
https://search.emarefa.net/detail/BIM-780422
American Medical Association (AMA)
Tanin, Abd al-Salam Mansur Ahmad. (2017). Investigation of optical injection locking model. (Master's theses Theses and Dissertations Master). Mutah University, Jordan
https://search.emarefa.net/detail/BIM-780422
Language
English
Data Type
Arab Theses
Record ID
BIM-780422