Experimental and numerical study of natural convection between tilted walls with attached fins
Other Title(s)
دراسة عملية و نظرية للحمل الحر بين جدارين مائلين بوجدود زعانف متصلة
Joint Authors
Jahaf, Kazim Awdah
Sab, Muhammad Abd al-Abbas
Source
The Iraqi Journal for Mechanical and Materials Engineering
Issue
Vol. 18, Issue 2 (30 Jun. 2018), pp.253-276, 24 p.
Publisher
University of Babylon College of Engineering
Publication Date
2018-06-30
Country of Publication
Iraq
No. of Pages
24
Main Subjects
Abstract EN
The free convection between two tilted adiabatic plates with centered heated horizontal cylinder with attached plate fin was investigated experimentally and numerically.
The experimental rig constructed from vertical adiabatic was filled with air plates with aspect ratio of (A= 12) tilted by angles of (15o, 30o, 45o, 60o, 75o, and 90o).
A horizontal heated cylinder with diameter of (16 cm) subjected under constant heat flux of (100, 500, 700, and 1000 W/m2), the Rayleigh number ranging from (3.5 ×107 to 4.5 ×109).
At the bottom of the rig left an opining with distance of (2, 4, 6, and 8 cm) but the upper left open to the atmosphere.
The tested cases was of (without fin, smooth, triangular, square, and semi-circle fin) was attached to the right wall of the cavity.
The numerical solution of the case was performed by solving the governing equations by ANSYS-FLUENT 14.0 package that dependent upon the finite volume method.
The experimental results show that the Nusselt number increases with increasing Rayleigh number, decreasing the inclination angle, increasing heat flux and with increasing the bottom opining distance.
Basically, the results showed that the using fins with any geometry will lead to increase the heat transfer rate.
The optimum increasing in the Nusselt number was found by using triangular plat fin.
Finally, the experimental data was compared with a numerical calculation and found that there is a good agreement in the same conditions.
American Psychological Association (APA)
Jahaf, Kazim Awdah& Sab, Muhammad Abd al-Abbas. 2018. Experimental and numerical study of natural convection between tilted walls with attached fins. The Iraqi Journal for Mechanical and Materials Engineering،Vol. 18, no. 2, pp.253-276.
https://search.emarefa.net/detail/BIM-837987
Modern Language Association (MLA)
Jahaf, Kazim Awdah& Sab, Muhammad Abd al-Abbas. Experimental and numerical study of natural convection between tilted walls with attached fins. The Iraqi Journal for Mechanical and Materials Engineering Vol. 18, no. 2 (Jun. 2018), pp.253-276.
https://search.emarefa.net/detail/BIM-837987
American Medical Association (AMA)
Jahaf, Kazim Awdah& Sab, Muhammad Abd al-Abbas. Experimental and numerical study of natural convection between tilted walls with attached fins. The Iraqi Journal for Mechanical and Materials Engineering. 2018. Vol. 18, no. 2, pp.253-276.
https://search.emarefa.net/detail/BIM-837987
Data Type
Journal Articles
Language
English
Notes
Includes bibliographical references : p. 275-276
Record ID
BIM-837987