Natural pigment–poly vinyl alcohol Nano composites thin films for solar cell

Other Title(s)

أغشية رقيقة من متراكبات نانوية لبولي فينيل الكحول صبغة طبيعية للخلايا الشمسية

Joint Authors

al-Dabbagh, Balqis Muhammad Diya
Salih, Rana Mahdi
Kazim, Hana Jawad

Source

Baghdad Science Journal

Issue

Vol. 17, Issue 3 (30 Sep. 2020), pp.832-840, 9 p.

Publisher

University of Baghdad College of Science for Women

Publication Date

2020-09-30

Country of Publication

Iraq

No. of Pages

9

Main Subjects

Physics

Topics

Abstract AR

تلعب الخلايا الشمسية دورا مهما في الطاقة المتجددة، حيث إنها محور التركيز الرئيسي للباحثين في مجال الطاقة المستدامة.

تهدف هذه الورقة إلى تصنيع مواد مركبة نانوية، باستخدام بولي فينيل الكحول (PVA) مع بيولوجي صديق للبيئة تم استخدامه لإعداد عينات من الأفلام الرقيقة.

تم تحضير تركيز 0.1 غم / مل من محلول بولي فينيل الكحول في الماء لأربعة عينات، مع إضافة تركيزات مختلفة من الصبغة النباتية (15 ٪ و 25 ٪ و 50 ٪) إلى كل من المحاليل الأربعة بشكل منفصل.

تم اختبار مناطق امتصاص الأشعة فوق البنفسجية بواسطة مطياف الأشعة فوق البنفسجية و المرئية المحوسبة (CECIL 2700)، وتم اختبار الخصائص البصرية بما في ذلك (الامتصاصية، الانعكاس، معامل الامتصاص، فجوة الطاقة وثابت العزل).

تم اجراء فحص طيف الأشعة تحت الحمراء (FTIR) لاختبار العينات.

تم اختبار التحليل الحراري للأغشية الرقيقة، بما في ذلك نقطة الانصهار (Tm)، و درجة البدء، و درجة النهاية، و البلورة ٪، بواسطة المسعر التفاضلي الحراري (DSC) (Shimadzu-4).

كما تم فحص مورفولوجيا السطح للأغشية الرقيقة بواسطة مجهر القوة الذرية (AFM).

تم اختبار زاوية التلامس أيضًا كمؤشر على قابلية تبلل السطح.

أثبتت النتائج أن امتصاص الأشعة فوق البنفسجية و FTIR يزيد بعد إضافة الصبغة الطبيعية إلى غشاء البولي فينيل الكحول، كما يفعل مع زيادة تركيز الصبغة الطبيعية.

كشف تحليل DSC عن زيادة في درجة انصهار غشاء البولي فينيل الكحول عند إضافة تركيز بنسبة 15 ٪ و يتناقص بتركيز 50 ٪ من الصبغة.

تظهر نتائج AFM زيادة في خشونة السطح، و بالتالي فإن عامل التحمل السطحي للأغشية الرقيقة يتناسب عكسيا مع تركيز الصبغة.

تقل زاوية التبلل من 46.5 درجة لأغشية PVA النقية إلى 44.

8 ° و 42.

6 ° و 35.2 ° بعد إضافة تركيز (15 و 25 و 50) ٪ من الصبغة الطبيعية على التوالي.

تم تعزيز الخواص البصرية عن طريق إضافة الصبغة الطبيعية مثل فجوة الطاقة انخفضت من 3 الكترون فولت لغشاء البولي فينيل الكحول الخالية من الأصباغ إلى 2.3 الكترون فولت للـبولي فينيل الكحول بعد إضافة صبغة عالية التركيز.

يزداد ثابت العزل الكهربائي بزيادة تركيز الصبغة، مما يؤدي إلى ارتفاع استقطاب الخلايا الشمسية.

Abstract EN

Solar cells thin films were prepared using polyvinyl alcohol (PVA) as a thin film, with extract of natural pigment from local flower.

A concentration of 0.1g / ml of polyvinyl alcohol solution in water was prepared for four samples, with various concentrations of plant pigment (0, 15, 25 and 50) % added to each of the four solutions separately for preparing (PVA with low concentrated dye, PVA with medium concentrated dye and PVA with high concentrated dye ) thin films respectively.

Ultraviolet orption regions were obtained by computerized UV-Visible (CECIL 2700).

Optical properties including (orbance, reflectance, orption coefficient, energy gap and dielectric constant) via UV- Vis were tested, too.

Fourier transform infrared (FTIR) spectrophotometer was employed to test the samples.

Thermal analysis of thin films, including melting point (Tm), onset degree, endset degree, and crystallinity% were tested by differential scanning calorimeter (DSC).

Three dimensional morphologies of thin films were inspected by atomic force microscopy (ATM).

Contact angle also was tested as an index to hydrophilicity.

Results proved that the ultraviolet and FTIR orption increase after adding the natural pigment to PVA thin film, as well as it increases with increasing concentration of natural pigment.

DSC analysis revealed an increase of PVA melting point when adding 15% concentration and it decreases with a 50 % concentration of pigment.

AFM results show an increase in surface roughness, hence the surface bearing index of PVA thin films is inversely proportional to pigment concentration.

Contact angle decreases from 46.5° for pure PVA thin film to 44.

8°, 42.

6° and 35.2° after adding (15, 25, and 50) % concentration of natural dye respectively.

Optical properties were enhanced by adding the natural dye, hence energy gap decreased from 3 eV for pure PVA to 2.3 eV for the PVA with a high concentrate dye.

Dielectric constant increased with increasing concentration of dye, which leads to high polarization of solar cell.

American Psychological Association (APA)

al-Dabbagh, Balqis Muhammad Diya& Kazim, Hana Jawad& Salih, Rana Mahdi. 2020. Natural pigment–poly vinyl alcohol Nano composites thin films for solar cell. Baghdad Science Journal،Vol. 17, no. 3, pp.832-840.
https://search.emarefa.net/detail/BIM-976753

Modern Language Association (MLA)

al-Dabbagh, Balqis Muhammad Diya…[et al.]. Natural pigment–poly vinyl alcohol Nano composites thin films for solar cell. Baghdad Science Journal Vol. 17, no. 3 (2020), pp.832-840.
https://search.emarefa.net/detail/BIM-976753

American Medical Association (AMA)

al-Dabbagh, Balqis Muhammad Diya& Kazim, Hana Jawad& Salih, Rana Mahdi. Natural pigment–poly vinyl alcohol Nano composites thin films for solar cell. Baghdad Science Journal. 2020. Vol. 17, no. 3, pp.832-840.
https://search.emarefa.net/detail/BIM-976753

Data Type

Journal Articles

Language

English

Notes

Includes bibliographical references : p. 839-840

Record ID

BIM-976753