![](/images/graphics-bg.png)
3-Dimensional Microorifice Fabricated Utilizing Single Undercut Etching Process for Producing Ultrasmall Water and Chitosan Droplets
المؤلفون المشاركون
Lin, Che-Hsin
Lan, Chun-Hung
Yang, Chih-Hui
المصدر
العدد
المجلد 2013، العدد 2013 (31 ديسمبر/كانون الأول 2013)، ص ص. 1-6، 6ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2013-11-24
دولة النشر
مصر
عدد الصفحات
6
التخصصات الرئيسية
الملخص EN
This research reports a microfluidic device for producing small droplets via a microorifice and a T-junction structure.
The orifice is fabricated using an isotropic undercut etching process of amorphous glass materials.
Since the equivalent hydraulic diameter of the produced microorifice can be as small as 1.1 μm, the microdevice can easily produce droplets of the size smaller than 10 μm in diameter.
In addition, a permanent hydrophobic coating technique is also applied to modify the main channel to be hydrophobic to enhance the formation of water-based droplets.
Experimental results show that the developed microfluidic chip with the ultrasmall orifice can steadily produce water-in-oil droplets with different sizes.
Uniform water-in-oil droplets with the size from 60 μm to 6.5 μm in diameter can be formed by adjusting the flow rate ratio of the continuous phase and the disperse phases from 1 to 7.
Moreover, curable linear polymer of chitosan droplets with the size smaller than 100 μm can also be successfully produced using the developed microchip device.
The microfluidic T-junction with a micro-orifice developed in the present study provides a simple yet efficient way to produce various droplets of different sizes.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Lin, Che-Hsin& Lan, Chun-Hung& Yang, Chih-Hui. 2013. 3-Dimensional Microorifice Fabricated Utilizing Single Undercut Etching Process for Producing Ultrasmall Water and Chitosan Droplets. Journal of Nanomaterials،Vol. 2013, no. 2013, pp.1-6.
https://search.emarefa.net/detail/BIM-1007483
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Lin, Che-Hsin…[et al.]. 3-Dimensional Microorifice Fabricated Utilizing Single Undercut Etching Process for Producing Ultrasmall Water and Chitosan Droplets. Journal of Nanomaterials No. 2013 (2013), pp.1-6.
https://search.emarefa.net/detail/BIM-1007483
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Lin, Che-Hsin& Lan, Chun-Hung& Yang, Chih-Hui. 3-Dimensional Microorifice Fabricated Utilizing Single Undercut Etching Process for Producing Ultrasmall Water and Chitosan Droplets. Journal of Nanomaterials. 2013. Vol. 2013, no. 2013, pp.1-6.
https://search.emarefa.net/detail/BIM-1007483
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1007483
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)