Evaluation of Harmonic Content from a Tap Transformer Based Grid Connection System for Wind Power

الملخص EN

Simulations done in MATLAB/Simulink together with experiments conducted at the Ångströms laboratory are used to evaluate and discuss the total harmonic distortion (THD) and total demand distortion (TDD) of a tap transformer based grid connection system.

The grid connection topology can be used with different turbine and generator topologies and is here applied on a vertical axis wind turbine (VAWT) with a permanent magnet synchronous generator (PMSG) and its operational scheme.

The full variable-speed wind conversion system consists of a diode rectifier, DC link, IGBT inverter, LCL-filter, and tap transformer.

The full variable-speed operation is enabled by the use of the different step-up ratios of the tap transformer.

In the laboratory study, a full experimental setup of the system was used, a clone of the on-site PMSG driven by a motor was used, and the grid was replaced with a resistive load.

With a resistive load, grid harmonics and possible unbalances are removed.

The results show a TDD and THD below 5% for the full operating range and harmonic values within the limits set up by IEEE-519.

Furthermore, a change in tap, going to a lower step-up ratio, results in a reduction in both THD and TDD for the same output power.