Design and simulation of a stepper motor with cores obtained from sintered Fe50%Ni alloy
المؤلفون المشاركون
Martins, Ricardo M. De
Dias, Moises De M.
Aquim, P. M.
Bittencourt, Sergio D.
Cezar, Jose L.
Mozetic, Halston J.
Mesquita, Raul F.
Borba, Munir G.
Verney, Jose C. K.
Gertz, Luiz Carlos
Schaeffer, Lirio
المصدر
العدد
المجلد 16، العدد 1 (31 مارس/آذار 2020)، ص ص. 67-76، 10ص.
الناشر
تاريخ النشر
2020-03-31
دولة النشر
الجزائر
عدد الصفحات
10
التخصصات الرئيسية
العلوم الطبيعية والحياتية (متداخلة التخصصات)
الملخص EN
The objective of this work was the development of a three-phase, six pole stepper motor with stator and rotor core built from Fe50%Ni alloy via powder metallurgy.
The study involves analysis of the magnetic, electrical and mechanical properties, besides motor design and software simulation using finite elements.
The Fe50%Ni alloy showed as result an electrical resistivity of 0.37 %%˙m, relative permeability of 946 and maximum induction of 0.93 T.
In the computational simulation, with the application of 1 A current per phase, the required voltage was 2.88 V, which resulted in a power of 2.88 W.
In this condition the stepper motor generates a torque of 6.81.10- 4 Nm with an air gap induction of 0.55 T.-
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Bittencourt, Sergio D.& Borba, Munir G.& Cezar, Jose L.& Verney, Jose C. K.& Martins, Ricardo M. De& Aquim, P. M.…[et al.]. 2020. Design and simulation of a stepper motor with cores obtained from sintered Fe50%Ni alloy. Journal of Electrical Systems،Vol. 16, no. 1, pp.67-76.
https://search.emarefa.net/detail/BIM-1020694
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Bittencourt, Sergio D.…[et al.]. Design and simulation of a stepper motor with cores obtained from sintered Fe50%Ni alloy. Journal of Electrical Systems Vol. 16, no. 1 (2020), pp.67-76.
https://search.emarefa.net/detail/BIM-1020694
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Bittencourt, Sergio D.& Borba, Munir G.& Cezar, Jose L.& Verney, Jose C. K.& Martins, Ricardo M. De& Aquim, P. M.…[et al.]. Design and simulation of a stepper motor with cores obtained from sintered Fe50%Ni alloy. Journal of Electrical Systems. 2020. Vol. 16, no. 1, pp.67-76.
https://search.emarefa.net/detail/BIM-1020694
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 76
رقم السجل
BIM-1020694
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر