Optimization of Laser Transmission Joining Process Parameters on Joint Strength of PET and 316 L Stainless Steel Joint Using Response Surface Methodology

الملخص EN

The objective of the present work is to study the effects of laser power, joining speed, and stand-off distance on the joint strength of PET and 316 L stainless steel joint.

The process parameters were optimized using response methodology for achieving good joint strength.

The central composite design (CCD) has been utilized to plan the experiments and response surface methodology (RSM) is employed to develop mathematical model between laser transmission joining parameters and desired response (joint strength).

From the ANOVA (analysis of variance), it was concluded that laser power is contributing more and it is followed by joining speed and stand-off distance.

In the range of process parameters, the result shows that laser power increases and joint strength increases.

Whereas joining speed increases, joint strength increases.

The joint strength increases with the increase of the stand-off distance until it reaches the center value; the joint strength then starts to decrease with the increase of stand-off distance beyond the center limit.

Optimum values of laser power, joining speed, and stand-off distance were found to be 18 watt, 100 mm/min, and 2 mm to get the maximum joint strength (predicted: 88.48 MPa).

There was approximately 3.37% error in the experimental and modeled results of joint strength.