Metallurgical Mechanism and Optical Properties of CuSnZnSSe Powders Using a 2-Step Sintering Process
المؤلفون المشاركون
Liu, Tai-Hsiang
Lui, Truan-Sheng
Hung, Fei-Yi
Chen, Kuan-Jen
المصدر
العدد
المجلد 2014، العدد 2014 (31 ديسمبر/كانون الأول 2014)، ص ص. 1-8، 8ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2014-06-05
دولة النشر
مصر
عدد الصفحات
8
التخصصات الرئيسية
الملخص EN
Cu2SnZn(S + Se)4 is an excellent absorber material for solar cells.
This study obtained Cu2SnZn(S + Se)4 powders through solid state reaction by the ball milling and sintering processes from elemental Cu, Zn, Sn, S, and Se without using either polluting chemicals or expensive vacuum facilities.
Ratios of S/S + Se in CuSnZnSSe were controlled from 0 to 1.
The results showed that the 2-step sintering process (400°C for 12 hrs and then 700°C for 1 hr) was able to stabilize the composition and structure of the CuSnZnSSe powders.
The crystallized intensity of the CuSnZnS matrix decreased with increasing the Se content.
Raising the Se content restrained the SnS phase and reduced the resistance of the absorber layer.
In addition, Raman data confirmed that Se caused a Raman shift in the CuSnZnSSe matrix and enhanced the optical properties of the CuSnZnSSe powders.
For the interface of CuSnZnSSe film and Mo substrate, Mo could diffuse into CuSnZnSSe matrix after 200°C annealing.
The interface thermal diffusion of CuSnZnSSe/ZnS improved the effects of stack to enhance the stability of structure.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Liu, Tai-Hsiang& Hung, Fei-Yi& Lui, Truan-Sheng& Chen, Kuan-Jen. 2014. Metallurgical Mechanism and Optical Properties of CuSnZnSSe Powders Using a 2-Step Sintering Process. Journal of Nanomaterials،Vol. 2014, no. 2014, pp.1-8.
https://search.emarefa.net/detail/BIM-1041198
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Liu, Tai-Hsiang…[et al.]. Metallurgical Mechanism and Optical Properties of CuSnZnSSe Powders Using a 2-Step Sintering Process. Journal of Nanomaterials No. 2014 (2014), pp.1-8.
https://search.emarefa.net/detail/BIM-1041198
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Liu, Tai-Hsiang& Hung, Fei-Yi& Lui, Truan-Sheng& Chen, Kuan-Jen. Metallurgical Mechanism and Optical Properties of CuSnZnSSe Powders Using a 2-Step Sintering Process. Journal of Nanomaterials. 2014. Vol. 2014, no. 2014, pp.1-8.
https://search.emarefa.net/detail/BIM-1041198
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1041198
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر