![](/images/graphics-bg.png)
Fabrication of Fe-6.5wt%Si Ribbons by Melt Spinning Method on Large Scale
المؤلفون المشاركون
Lin, Jun-pin
Liang, Y. F.
Wang, S.
Li, H.
Jiang, Y. M.
Ye, F.
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2015، العدد 2015 (31 ديسمبر/كانون الأول 2015)، ص ص. 1-5، 5ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2015-05-04
دولة النشر
مصر
عدد الصفحات
5
الملخص EN
Melt spinning method has been widely applied for fabrication of Fe-based amorphous/nanocrystalline ribbons in industry.
Compared with Fe-based amorphous/nanocrystalline alloys, Fe-6.5wt%Si high silicon steel is of low cost and has comparable excellent soft magnetic properties.
Due to higher melting point and absence of supercooled liquid region, fabrication of Fe-6.5wt%Si ribbons is very hard and is only on lab scale.
In this paper, we report that large scale fabrication of Fe-6.5wt%Si ribbons was successful and microstructures, ordered structures, and mechanical and soft magnetic properties of the ribbons were investigated.
Due to rapid solidification rate, the ribbons were of ultrafine grains, and low degree of order and exhibited some extent of bending and tensile ductility.
After heat treatment, excellent soft magnetic properties were obtained.
Due to near-zero magnetostriction, the ribbons are promising to be used in electric devices with high frequencies where low noises are required.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Liang, Y. F.& Wang, S.& Li, H.& Jiang, Y. M.& Ye, F.& Lin, Jun-pin. 2015. Fabrication of Fe-6.5wt%Si Ribbons by Melt Spinning Method on Large Scale. Advances in Materials Science and Engineering،Vol. 2015, no. 2015, pp.1-5.
https://search.emarefa.net/detail/BIM-1053171
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Liang, Y. F.…[et al.]. Fabrication of Fe-6.5wt%Si Ribbons by Melt Spinning Method on Large Scale. Advances in Materials Science and Engineering No. 2015 (2015), pp.1-5.
https://search.emarefa.net/detail/BIM-1053171
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Liang, Y. F.& Wang, S.& Li, H.& Jiang, Y. M.& Ye, F.& Lin, Jun-pin. Fabrication of Fe-6.5wt%Si Ribbons by Melt Spinning Method on Large Scale. Advances in Materials Science and Engineering. 2015. Vol. 2015, no. 2015, pp.1-5.
https://search.emarefa.net/detail/BIM-1053171
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1053171
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)