Characteristics of Nanophase WC and WC-3 wt% (Ni, Co, and Fe) Alloys Using a Rapid Sintering Process for the Application of Friction Stir Processing Tools
المؤلفون المشاركون
Kim, Daeup
Choi, Young
Kim, Yongil
Jung, Seungboo
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2015، العدد 2015 (31 ديسمبر/كانون الأول 2015)، ص ص. 1-9، 9ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2015-07-16
دولة النشر
مصر
عدد الصفحات
9
الملخص EN
Microstructures and mechanical characteristics of tungsten carbide- (WC-) based alloys, that is, WC, WC-3 wt% Ni, WC-3 wt% Co, and WC-3 wt% Fe, fabricated using a spark plasma sintering (SPS) method for the application of friction stir processing tools were evaluated.
The sintered bodies with a diameter of 66 mm showed relative densities of up to 99% with an average particle size of 0.26~0.41 μm under a pressure condition of 60 MPa with an electric current for 35 min without noticeable grain growth during sintering.
Even though no phase changes were observed after the ball milling process the phases of W2C and WC 1 - x appeared in all sintered samples after sintering.
The Vickers hardness and fracture toughness of the WC, WC-3 wt% Ni, WC-3 wt% Co, and WC-3 wt% Fe samples ranged from 2,240 kg mm2 to 2,730 kg mm2 and from 6.3 MPa·m1/2 to 9.1 MPa·m1/2, respectively.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Kim, Daeup& Choi, Young& Kim, Yongil& Jung, Seungboo. 2015. Characteristics of Nanophase WC and WC-3 wt% (Ni, Co, and Fe) Alloys Using a Rapid Sintering Process for the Application of Friction Stir Processing Tools. Advances in Materials Science and Engineering،Vol. 2015, no. 2015, pp.1-9.
https://search.emarefa.net/detail/BIM-1053230
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Kim, Daeup…[et al.]. Characteristics of Nanophase WC and WC-3 wt% (Ni, Co, and Fe) Alloys Using a Rapid Sintering Process for the Application of Friction Stir Processing Tools. Advances in Materials Science and Engineering No. 2015 (2015), pp.1-9.
https://search.emarefa.net/detail/BIM-1053230
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Kim, Daeup& Choi, Young& Kim, Yongil& Jung, Seungboo. Characteristics of Nanophase WC and WC-3 wt% (Ni, Co, and Fe) Alloys Using a Rapid Sintering Process for the Application of Friction Stir Processing Tools. Advances in Materials Science and Engineering. 2015. Vol. 2015, no. 2015, pp.1-9.
https://search.emarefa.net/detail/BIM-1053230
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1053230
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر