A Study of Isothermal Curing of PMI Using DMA
المؤلفون المشاركون
Zhang, Jing
Ye, Rui
Zou, Jun
Tang, Jijun
Wang, Hongliang
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2015، العدد 2015 (31 ديسمبر/كانون الأول 2015)، ص ص. 1-12، 12ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2015-08-19
دولة النشر
مصر
عدد الصفحات
12
الملخص EN
The isothermal curing of polymethacrylimide (PMI) is studied through the use of dynamic mechanical analysis (DMA).
Based on the growth rate of measured dynamic mechanical property, the relative conversion is defined to investigate the evolution of storage modulus E′ at different curing temperatures.
Hsich’s nonequilibrium thermodynamic fluctuation theory, Avrami equation, and isoconversional methods are used to analyze isothermal cure kinetics of PMI.
The results show that there are different increase modes of E′ at low temperature range and high temperature range, respectively.
In low temperature range, the relative conversion curves include a transitional stage which is found to be strongly frequency-dependent, but this stage is not observed in the relative conversion curve in high temperature range.
During the isothermal curing process, the relative evolution of E′ can be described by Hsich’s nonequilibrium thermodynamic fluctuation theory and Avrami equation.
Moreover, the values and evolutions of activation energy are different in two temperature ranges, which suggest that the curing mechanism probably has changed.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Zhang, Jing& Ye, Rui& Zou, Jun& Tang, Jijun& Wang, Hongliang. 2015. A Study of Isothermal Curing of PMI Using DMA. Advances in Materials Science and Engineering،Vol. 2015, no. 2015, pp.1-12.
https://search.emarefa.net/detail/BIM-1053623
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Zhang, Jing…[et al.]. A Study of Isothermal Curing of PMI Using DMA. Advances in Materials Science and Engineering No. 2015 (2015), pp.1-12.
https://search.emarefa.net/detail/BIM-1053623
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Zhang, Jing& Ye, Rui& Zou, Jun& Tang, Jijun& Wang, Hongliang. A Study of Isothermal Curing of PMI Using DMA. Advances in Materials Science and Engineering. 2015. Vol. 2015, no. 2015, pp.1-12.
https://search.emarefa.net/detail/BIM-1053623
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1053623
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر