Experimental Study on Dry Friction Damping Characteristics of the Steam Turbine Blade Material with Nonconforming Contacts

الملخص EN

An experiment system has been established to study the dry friction damping dynamic characteristics of the steam turbine blade material 1Cr13.

The friction dynamic characteristics of the specimens with nonconforming contact surfaces are measured under different parameters.

The experiment results are compared with that of the macroslip hysteresis model and the Mindlin microslip friction model in detail.

The results show that the experimental result of the tangential contact stiffness is in good agreement with that of the theory result based on the fractal theory and the Hertz contact theory by Jiang et al., 2009.

The dimensionless equivalent stiffness and equivalent damping obtained by the macroslip hysteresis model agree well with the experimental results when relative motion is relatively large.

However, the results of the macroslip hysteresis model differ a lot from the experimental results when relative motion is relatively small.

Compared with the macroslip hysteresis model, the Mindlin microslip friction model can predict the dimensionless equivalent stiffness and equivalent damping accurately during the whole measurement range.

The linear regularities of dimensionless equivalent stiffness and equivalent damping are obtained, which decrease the difficulty of building the vibration analysis model of the blade with sufficient accuracy.