![](/images/graphics-bg.png)
Fabrication of TiO2 Crystalline Coatings by Combining Ti-6Al-4V Anodic Oxidation and Heat Treatments
المؤلفون المشاركون
Schvezov, Carlos E.
Vera, María Laura
Rosenberger, Mario Roberto
Ares, Alicia Esther
المصدر
International Journal of Biomaterials
العدد
المجلد 2015، العدد 2015 (31 ديسمبر/كانون الأول 2015)، ص ص. 1-9، 9ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2015-02-15
دولة النشر
مصر
عدد الصفحات
9
التخصصات الرئيسية
الملخص EN
The bio- and hemocompatibility of titanium alloys are due to the formation of a TiO2 layer.
This natural oxide may have fissures which are detrimental to its properties.
Anodic oxidation is used to obtain thicker films.
By means of this technique, at low voltages oxidation, amorphous and low roughness coatings are obtained, while, above a certain voltage, crystalline and porous coatings are obtained.
According to the literature, the crystalline phases of TiO2, anatase, and rutile would present greater biocompatibility than the amorphous phase.
On the other hand, for hemocompatible applications, smooth and homogeneous surfaces are required.
One way to obtain crystalline and homogeneous coatings is by heat treatments after anodic oxidation.
The aim of this study is to evaluate the influence of heat treatments on the thickness, morphology, and crystalline structure of the TiO2 anodic coatings.
The characterization was performed by optical and scanning electron microscopy, X-ray diffraction, and X-ray reflectometry.
Coatings with different colors of interference were obtained.
There were no significant changes in the surface morphology and roughness after heat treatment of 500°C.
Heat treated coatings have different proportions of the crystalline phases, depending on the voltage of anodic oxidation and the temperature of the heat treatment.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Vera, María Laura& Rosenberger, Mario Roberto& Schvezov, Carlos E.& Ares, Alicia Esther. 2015. Fabrication of TiO2 Crystalline Coatings by Combining Ti-6Al-4V Anodic Oxidation and Heat Treatments. International Journal of Biomaterials،Vol. 2015, no. 2015, pp.1-9.
https://search.emarefa.net/detail/BIM-1065295
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Vera, María Laura…[et al.]. Fabrication of TiO2 Crystalline Coatings by Combining Ti-6Al-4V Anodic Oxidation and Heat Treatments. International Journal of Biomaterials No. 2015 (2015), pp.1-9.
https://search.emarefa.net/detail/BIM-1065295
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Vera, María Laura& Rosenberger, Mario Roberto& Schvezov, Carlos E.& Ares, Alicia Esther. Fabrication of TiO2 Crystalline Coatings by Combining Ti-6Al-4V Anodic Oxidation and Heat Treatments. International Journal of Biomaterials. 2015. Vol. 2015, no. 2015, pp.1-9.
https://search.emarefa.net/detail/BIM-1065295
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1065295
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)