Sb2S3 Quantum-Dot Sensitized Solar Cells with Silicon Nanowire Photoelectrode

الملخص EN

We propose a novel quantum-dot sensitized solar cell (QDSSC) structure that employs a quantum dot/semiconductor silicon (QD/Si) coaxial nanorod array to replace the conventional dye/TiO2/TCO photoelectrode.

We replaced the backlight input mode with top-side illumination and used a quantum dot to replace dye as the light-absorbing material.

Photon-excited photoelectrons can be effectively transported to each silicon nanorod and conveyed to the counter electrode.

We use two-stage metal-assisted etching (MAE) to fabricate the micro-nano hybrid structure on a silicon substrate.

We then use the chemical bath deposition (CBD) method to synthesize a Sb2S3 quantum dot on the surface of each silicon nanorod to form the photoelectrode for the quantum dot/semiconductor silicon coaxial nanorod array.

We use a xenon lamp to simulate AM 1.5 G (1000 W/m2) sunlight.

Then, we investigate the influence of different silicon nanorod arrays and CBD deposition times on the photoelectric conversion efficiency.

When an NH (N-type with high resistance) silicon substrate is used, the QD/Si coaxial nanorod array synthesized by three runs of Sb2S3 deposition shows the highest photoelectric conversion efficiency of 0.253%.

The corresponding short-circuit current density, open-circuit voltage, and fill factor are 5.19 mA/cm2, 0.24 V, and 20.33%, respectively.