Interdigital Piezopolymer Transducers for Time of Flight Measurements with Ultrasonic Lamb Waves on Carbon-Epoxy Composites under Pure Bending Stress

الملخص EN

Interdigital transducers fabricated with piezopolymer film have been realized to excite ultrasonic Lamb waves in a composite laminate subjected to pure bending stresses.

Lamb waves were generated and detected in a cross-ply [0°/90°] 4 mm thick carbon-fiber composite, by using two interdigital transducers in pitch-catch configuration.

We demonstrate that the choice of the piezopolymer transducer technology is suitable for this type of investigation and the advantages of the proposed transducer assembly and bonding are described.

A full set-up is described to determine the relationship between the time of flight of the recorded signals and the applied bending moment.

Interdigital transducers were designed according to simulations of the dispersion curves, in order to operate at a central frequency of 450 kHz.

This frequency corresponds to a central wavelength of 16 mm and to a group velocity of about 6000 m/s for the first symmetric guided wave mode.

The variations in the time of flight of ultrasonic recorded signals were measured as a function of the variations in the bending moment.

The static and dynamic load tests were in good agreement with strain gage measurements performed in the micro deformation range (0–1400 µm/m).