Durability to Chemical Attack by Acids of Epoxy Microconcretes by Comparison to Cementitious Ones

الملخص EN

This research deals with the durability of micropolymer concrete (MPC) obtained by mixing an epoxy resin with fine and coarse sand particles.

In particular the resistance of the micropolymer concrete to chemical solutions (citric acid C6H8O7, sulfuric acid H2SO4, and hydrochloric acid HCl) is investigated and compared to this of Portland cement microconcrete.

Two MPC are tested.

The first is formulated with 9% mass fraction of epoxy polymer whereas calcareous fillers have been incorporated in the second formulation in order to reduce the percentage of the epoxy binder.

It is shown that a microconcrete designed with 7% of epoxy, 10% of fillers, and 83% of aggregates is characterized by higher physical and mechanical properties than those of the MPC formulated with 9% of epoxy binder.

The mechanical properties of the resulting materials after their exposure to the three selected acid solutions at different durations were studied through compressive, three points bending and ultrasonic wave propagation tests.

The obtained results are compared to those of microcement concretes (MCC) tested under the same conditions as MPC.

The results show that both microepoxy polymer concretes exhibit better mechanical properties and highest resistance to chemical attack than the microcement concrete.