Optimizing Cutting Conditions for Minimum Surface Roughness in Face Milling of High Strength Steel Using Carbide Inserts
المؤلفون المشاركون
Abbas, Adel Taha
Al-Bahkali, Essam A.
Ragab, Adham Ezzat
El-Danaf, Ehab A.
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2016، العدد 2016 (31 ديسمبر/كانون الأول 2016)، ص ص. 1-14، 14ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2016-04-04
دولة النشر
مصر
عدد الصفحات
14
الملخص EN
A full factorial design technique is used to investigate the effect of machining parameters, namely, spindle speed ( N ) , depth of cut ( a p ) , and table feed rate ( V f ) , on the obtained surface roughness ( R a and R t ) during face milling operation of high strength steel.
A second-order regression model was built using least squares method depending on the factorial design results to approximate a mathematical relationship between the surface roughness and the studied process parameters.
Analysis of variance was conducted to estimate the significance of each factor and interaction with respect to the surface roughness.
For R a , the results show that spindle speed, depth of cut, and table feed rate have a significant effect on the surface roughness in both linear and quadratic terms.
There is also an interaction between depth of cut and feed rate.
It also appears that feed rate has the greatest effect on the data variation followed by depth of cut.
For R t , the results show that the table feed rate is the most effective factor followed by the depth of cut, while the spindle speed had a significant small effect only in its quadratic term.
The conditions of minimum R a and R t are identified through least square optimization.
Moreover, multiobjective optimization for minimizing R a and maximizing metal removal rate Q is conducted and the results are presented.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Abbas, Adel Taha& Ragab, Adham Ezzat& Al-Bahkali, Essam A.& El-Danaf, Ehab A.. 2016. Optimizing Cutting Conditions for Minimum Surface Roughness in Face Milling of High Strength Steel Using Carbide Inserts. Advances in Materials Science and Engineering،Vol. 2016, no. 2016, pp.1-14.
https://search.emarefa.net/detail/BIM-1096373
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Abbas, Adel Taha…[et al.]. Optimizing Cutting Conditions for Minimum Surface Roughness in Face Milling of High Strength Steel Using Carbide Inserts. Advances in Materials Science and Engineering No. 2016 (2016), pp.1-14.
https://search.emarefa.net/detail/BIM-1096373
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Abbas, Adel Taha& Ragab, Adham Ezzat& Al-Bahkali, Essam A.& El-Danaf, Ehab A.. Optimizing Cutting Conditions for Minimum Surface Roughness in Face Milling of High Strength Steel Using Carbide Inserts. Advances in Materials Science and Engineering. 2016. Vol. 2016, no. 2016, pp.1-14.
https://search.emarefa.net/detail/BIM-1096373
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1096373
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر