Adaptation Measurement of CADCAM Dental Crowns with X-Ray Micro-CT: Metrological Chain Standardization and 3D Gap Size Distribution
المؤلفون المشاركون
Tapie, L.
Chiche, N.
Boitelle, P.
Morenton, P.
Attal, J.-P.
Schmitt, N.
Vennat, E.
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2016، العدد 2016 (31 ديسمبر/كانون الأول 2016)، ص ص. 1-13، 13ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2016-11-24
دولة النشر
مصر
عدد الصفحات
13
الملخص EN
Computer-Aided Design and Manufacturing systems are increasingly used to produce dental prostheses, but the parts produced suffer from a lack of evaluation, especially concerning the internal gap of the final assembly, that is, the space between the prepared tooth and the prosthesis.
X-ray micro-Computed Tomography (micro-CT) is a noninvasive imaging technique enabling the internal inspection of the assembly.
It has proved to be an efficient tool for measuring the gap.
In this study, a critical review of the protocols using micro-CT to quantify the gap is proposed as an introduction to a new protocol aimed at minimizing errors and enabling comparison between CAD/CAM systems.
To compare different systems, a standardized protocol is proposed including two reference geometries.
Micro-CT is used to acquire the reference geometries.
A new 3D method is then proposed and a new indicator is defined (Gap Size Distribution (GSD)).
In addition, the usual 2D measurements are described and discussed.
The 3D gap measurement method proposed can be used in clinical case geometries and has the considerable advantage of minimizing the data processing steps before performing the measurements.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Tapie, L.& Chiche, N.& Boitelle, P.& Morenton, P.& Attal, J.-P.& Schmitt, N.…[et al.]. 2016. Adaptation Measurement of CADCAM Dental Crowns with X-Ray Micro-CT: Metrological Chain Standardization and 3D Gap Size Distribution. Advances in Materials Science and Engineering،Vol. 2016, no. 2016, pp.1-13.
https://search.emarefa.net/detail/BIM-1096418
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Tapie, L.…[et al.]. Adaptation Measurement of CADCAM Dental Crowns with X-Ray Micro-CT: Metrological Chain Standardization and 3D Gap Size Distribution. Advances in Materials Science and Engineering No. 2016 (2016), pp.1-13.
https://search.emarefa.net/detail/BIM-1096418
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Tapie, L.& Chiche, N.& Boitelle, P.& Morenton, P.& Attal, J.-P.& Schmitt, N.…[et al.]. Adaptation Measurement of CADCAM Dental Crowns with X-Ray Micro-CT: Metrological Chain Standardization and 3D Gap Size Distribution. Advances in Materials Science and Engineering. 2016. Vol. 2016, no. 2016, pp.1-13.
https://search.emarefa.net/detail/BIM-1096418
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1096418
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر