Electrochemical and Microstructural Analysis of FeS Films from Acidic Chemical Bath at Varying Temperatures, pH, and Immersion Time

الملخص EN

The corrosion resistance and corrosion products of 4130 alloy steel have been investigated by depositing thin films of iron sulfide synthesized from an acidic chemical bath.

Tests were conducted at varying temperatures (25°C–75°C), pH levels (2–4), and immersion time (24–72 hours).

The corrosion behavior was monitored by linear polarization resistance (LPR) method.

X-ray Diffraction (XRD), Energy Dispersive X-ray (EDX) spectroscopy, and Scanning Electron Microscopy (SEM) have been applied to characterize the corrosion products.

The results show that, along with the formation of an iron sulfide protective film on the alloy surface, increasing temperature, increasing immersion time, and decreasing pH all directly increase the corrosion rate of steel in the tested experimental conditions.

It was also concluded that increasing temperature causes an initial increase of the corrosion rate followed by a large decrease due to transformation of the iron sulfide crystalline structure.