Effect of operation conditions on mechanical properties of aa7020-t53 alloy welded by friction stir welding
العناوين الأخرى
تأثير ظروف العمل على الخواص الميكانيكية لسبيكة الألمنيوم الملحومة (T53-7020 AA) بطريقة اللحام الاحتكاكي بالخلط
المؤلفون المشاركون
Abd Allah, Isam Tariq
Ibrahim, Zaman Khalil
المصدر
Journal of Engineering and Sustainable Development
العدد
المجلد 23، العدد 2 (31 مارس/آذار 2019)، ص ص. 42-55، 14ص.
الناشر
الجامعة المستنصرية كلية الهندسة
تاريخ النشر
2019-03-31
دولة النشر
العراق
عدد الصفحات
14
التخصصات الرئيسية
العلوم الاجتماعية (متداخلة التخصصات)
الموضوعات
الملخص EN
Friction stir welding -FSW- is a new process of joining AA7020- T53 aluminum alloy sheet.
There are few parameters which effects of FSW such as spindle speed, feed rate, tool design and tool tilt angle.
In this search, the effect of tool rotational speed (spindle speed) and travel speed (feed rate) on mechanical properties are discussed.
The FSW technique was performed using three different of rotational speeds and three different traverse speeds, while other parameters are kept constant to compare between joints.
It was found that the best mechanical properties can be obtained from using high spindle speed and high feed rate.
The ultimate tensile strength increases approximately 25% while the yield stress and elongation increases approximately 19% and 57% respectively, when used spindle speed (900r.
p.
m) and feed rate (50 Friction stir welding -FSW- is a new process of joining AA7020- T53 aluminum alloy sheet.
There are few parameters which effects of FSW such as spindle speed, feed rate, tool design and tool tilt angle.
In this search, the effect of tool rotational speed (spindle speed) and travel speed (feed rate) on mechanical properties are discussed.
The FSW technique was performed using three different of rotational speeds and three different traverse speeds, while other parameters are kept constant to compare between joints.
It was found that the best mechanical properties can be obtained from using high spindle speed and high feed rate.
The ultimate tensile strength increases approximately 25% while the yield stress and elongation increases approximately 19% and 57% respectively, when used spindle speed (900r.
p.
m) and feed rate (50 mm/min).
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Abd Allah, Isam Tariq& Ibrahim, Zaman Khalil. 2019. Effect of operation conditions on mechanical properties of aa7020-t53 alloy welded by friction stir welding. Journal of Engineering and Sustainable Development،Vol. 23, no. 2, pp.42-55.
https://search.emarefa.net/detail/BIM-1113574
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Abd Allah, Isam Tariq& Ibrahim, Zaman Khalil. Effect of operation conditions on mechanical properties of aa7020-t53 alloy welded by friction stir welding. Journal of Engineering and Sustainable Development Vol. 23, no. 2 (Mar. 2019), pp.42-55.
https://search.emarefa.net/detail/BIM-1113574
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Abd Allah, Isam Tariq& Ibrahim, Zaman Khalil. Effect of operation conditions on mechanical properties of aa7020-t53 alloy welded by friction stir welding. Journal of Engineering and Sustainable Development. 2019. Vol. 23, no. 2, pp.42-55.
https://search.emarefa.net/detail/BIM-1113574
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
-
رقم السجل
BIM-1113574
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر