Spinning Process Test and Optical Topography Measurement Technology for the Shell with Longitudinal and Latitudinal Inner Ribs
المؤلفون المشاركون
Liang, Wei
Lv, Qiongying
Guan, Lin
Xing, Zhigang
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2019، العدد 2019 (31 ديسمبر/كانون الأول 2019)، ص ص. 1-14، 14ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2019-12-18
دولة النشر
مصر
عدد الصفحات
14
الملخص EN
The paper studies the complicated problem in the spinning process of the shell with longitudinal and latitudinal inner ribs.
The finite element software ABAQUS is used to establish the finite element model of the cylindrical shell with the longitudinal and latitudinal inner ribs.
The numerical simulation of the spinning process is carried out.
The stress distribution and strain distribution of the inner and outer surfaces during the spin-forming process are determined, and the orthogonal test method is used to determine the optimization process test parameters.
The influence of the main process parameters on the wall thickness difference of the inner rib shell is obtained by the range analysis: wall thickness reduction rate > rotary wheel feed speed > rotor working angle (arranging according to their influences).
And then the corresponding process parameters recommended by the spinning test are given.
The measurement problem of inner ribs is solved by building of the robot shape measurement system which helps detect the three-dimensional shape of the inner ribs, and the precision of the spun sample was detected by the point cloud deviation comparison.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Liang, Wei& Lv, Qiongying& Guan, Lin& Xing, Zhigang. 2019. Spinning Process Test and Optical Topography Measurement Technology for the Shell with Longitudinal and Latitudinal Inner Ribs. Advances in Materials Science and Engineering،Vol. 2019, no. 2019, pp.1-14.
https://search.emarefa.net/detail/BIM-1119502
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Liang, Wei…[et al.]. Spinning Process Test and Optical Topography Measurement Technology for the Shell with Longitudinal and Latitudinal Inner Ribs. Advances in Materials Science and Engineering No. 2019 (2019), pp.1-14.
https://search.emarefa.net/detail/BIM-1119502
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Liang, Wei& Lv, Qiongying& Guan, Lin& Xing, Zhigang. Spinning Process Test and Optical Topography Measurement Technology for the Shell with Longitudinal and Latitudinal Inner Ribs. Advances in Materials Science and Engineering. 2019. Vol. 2019, no. 2019, pp.1-14.
https://search.emarefa.net/detail/BIM-1119502
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1119502
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر