Semisolid Compression Brazing of Al50Si Alloy Using Zn-Al-Cu Filler Metal Assisted by SiC Particles
المؤلفون المشاركون
Xiao, Jing
Li, Shun
Bai, Shuxin
Xiong, Degan
Tang, Yu
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2019، العدد 2019 (31 ديسمبر/كانون الأول 2019)، ص ص. 1-10، 10ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2019-12-18
دولة النشر
مصر
عدد الصفحات
10
الملخص EN
Semisolid compression brazing of Al50Si alloy using Zn-Al-Cu filler metal assisted by SiC particles coating has been developed.
The effects of the size and concentration of SiC particles on the microstructure and mechanical properties of the joints were studied.
By using 1 μm SiC particles and the concentration of SiC particles increased to 3 g/m2, oxide film on the surface of base metal was completely disrupted and a good bonding strength was obtained.
As SiC concentration further increased to 4 g/m2, colonies of SiC particle with nonwetting areas of filler metal formed at the interface, resulting in a decrease in the bonding strength.
By using 5 μm SiC particles, the bonding strength was enhanced as SiC concentration increased from 1 g/m2 to 3 g/m2 due to the removal of the oxide film.
By further increasing SiC concentration to 16 g/m2, the strength was constantly improved because of the dislocation strengthening effect generated at the SiC particle layer/filler metal interface.
When SiC concentration increased to 32 g/m2, nonwetting area appeared inside the SiC particles layer, causing a decrease in the bonding strength.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Xiao, Jing& Li, Shun& Bai, Shuxin& Xiong, Degan& Tang, Yu. 2019. Semisolid Compression Brazing of Al50Si Alloy Using Zn-Al-Cu Filler Metal Assisted by SiC Particles. Advances in Materials Science and Engineering،Vol. 2019, no. 2019, pp.1-10.
https://search.emarefa.net/detail/BIM-1119656
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Xiao, Jing…[et al.]. Semisolid Compression Brazing of Al50Si Alloy Using Zn-Al-Cu Filler Metal Assisted by SiC Particles. Advances in Materials Science and Engineering No. 2019 (2019), pp.1-10.
https://search.emarefa.net/detail/BIM-1119656
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Xiao, Jing& Li, Shun& Bai, Shuxin& Xiong, Degan& Tang, Yu. Semisolid Compression Brazing of Al50Si Alloy Using Zn-Al-Cu Filler Metal Assisted by SiC Particles. Advances in Materials Science and Engineering. 2019. Vol. 2019, no. 2019, pp.1-10.
https://search.emarefa.net/detail/BIM-1119656
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1119656
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر