Fabrication of ABSGraphene Oxide Composite Filament for Fused Filament Fabrication (FFF) 3D Printing
المؤلفون المشاركون
Potiyaraj, P.
Aumnate, C.
Pongwisuthiruchte, A.
Pattananuwat, P.
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2018، العدد 2018 (31 ديسمبر/كانون الأول 2018)، ص ص. 1-9، 9ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2018-11-06
دولة النشر
مصر
عدد الصفحات
9
الملخص EN
Additive manufacturing, the so-called three-dimensional (3D) printing, is a revolutionary emerging technology.
Fused filament fabrication (FFF) is the most used 3D printing technology in which the melted filament is extruded through the nozzle and builds up layer by layer onto the build platform.
The layers are then fused together and solidified into final parts.
Graphene-based materials have been positively incorporated into polymers for innovative applications, such as for the mechanical, thermal, and electrical enhancement.
However, to reach optimum properties, the graphene fillers are necessary to be well dispersed in polymers matrix.
This study aims to emphasise the interest of producing ABS/graphene oxide (GO) composites for 3D printing application.
The ABS/GO composite filaments were produced using dry mixing and solvent mixing methods before further melt extruded to investigate the proper way to disperse GO into ABS matrix.
The ABS/GO composite filament with 2 wt.% of GO, prepared from the solvent mixing method, was successfully printed into a 3D model.
By adding GO, the tensile strength and Young’s modulus of ABS can be enhanced.
However, the ABS/GO composite filament that was prepared via the dry mixing method failed to print.
This could be attributed to the aggregation of GO, leading to the die clogging and failure of the printing process.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Aumnate, C.& Pongwisuthiruchte, A.& Pattananuwat, P.& Potiyaraj, P.. 2018. Fabrication of ABSGraphene Oxide Composite Filament for Fused Filament Fabrication (FFF) 3D Printing. Advances in Materials Science and Engineering،Vol. 2018, no. 2018, pp.1-9.
https://search.emarefa.net/detail/BIM-1120242
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Aumnate, C.…[et al.]. Fabrication of ABSGraphene Oxide Composite Filament for Fused Filament Fabrication (FFF) 3D Printing. Advances in Materials Science and Engineering No. 2018 (2018), pp.1-9.
https://search.emarefa.net/detail/BIM-1120242
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Aumnate, C.& Pongwisuthiruchte, A.& Pattananuwat, P.& Potiyaraj, P.. Fabrication of ABSGraphene Oxide Composite Filament for Fused Filament Fabrication (FFF) 3D Printing. Advances in Materials Science and Engineering. 2018. Vol. 2018, no. 2018, pp.1-9.
https://search.emarefa.net/detail/BIM-1120242
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1120242
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر