Research on the Cross Section Forming Quality of Three-Dimensional Multipoint Stretch Forming Parts
المؤلفون المشاركون
Lin, Xiangfeng
Li, Yi
Liang, Jicai
Liang, Ce
Teng, Fei
Chen, Guangyi
Yu, Jiaqi
Sun, Guangping
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2018، العدد 2018 (31 ديسمبر/كانون الأول 2018)، ص ص. 1-11، 11ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2018-06-24
دولة النشر
مصر
عدد الصفحات
11
الملخص EN
This paper introduced the basic principle and main influencing factors of the three-dimensional multipoint stretch forming process and investigated the optimized scheme of the cross section forming quality.
The main factors affecting the stretch forming process were studied by the orthogonal test through the numerical simulation technique.
In the case of a good target shape, the best combination of forming parameters was established by using the range method.
The cross-sectional distortion of the formed profile is the smallest when the prestretching amount is 1% of the profile length, the poststretching amount is 0.8% of the profile length, the number of the die heads is 12, and the friction coefficient is 0.15.
The optimal combination of forming parameters was verified by the multipoint bending test.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Yu, Jiaqi& Li, Yi& Teng, Fei& Liang, Jicai& Lin, Xiangfeng& Liang, Ce…[et al.]. 2018. Research on the Cross Section Forming Quality of Three-Dimensional Multipoint Stretch Forming Parts. Advances in Materials Science and Engineering،Vol. 2018, no. 2018, pp.1-11.
https://search.emarefa.net/detail/BIM-1120701
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Yu, Jiaqi…[et al.]. Research on the Cross Section Forming Quality of Three-Dimensional Multipoint Stretch Forming Parts. Advances in Materials Science and Engineering No. 2018 (2018), pp.1-11.
https://search.emarefa.net/detail/BIM-1120701
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Yu, Jiaqi& Li, Yi& Teng, Fei& Liang, Jicai& Lin, Xiangfeng& Liang, Ce…[et al.]. Research on the Cross Section Forming Quality of Three-Dimensional Multipoint Stretch Forming Parts. Advances in Materials Science and Engineering. 2018. Vol. 2018, no. 2018, pp.1-11.
https://search.emarefa.net/detail/BIM-1120701
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1120701
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر