Synthesis and Thermomechanical Characterization of Nylon 6Cu Nanocomposites Produced by an Ultrasound-Assisted Extrusion Method
المؤلفون المشاركون
Ávila-Orta, Carlos
Sierra-Ávila, Rubén
Pérez-Alvarez, Marissa
Cadenas-Pliego, Gregorio
Jiménez-Regalado, Enrique
Mata-Padilla, José M.
Valdez-Garza, Janett
Soto-Castruita, Enrique
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2018، العدد 2018 (31 ديسمبر/كانون الأول 2018)، ص ص. 1-10، 10ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2018-11-13
دولة النشر
مصر
عدد الصفحات
10
الملخص EN
A nylon 6 nanocomposite with copper nanoparticles processed by ultrasound-assisted extrusion was prepared at concentrations between 0.01 and 0.50 wt.%, and its thermal and mechanical properties were determined.
The presence of the crystalline phase α (α1 and α2) in the polymer matrix was confirmed by X-ray diffraction, and the presence of the α2 phase showed a greater increase than the α1 phase as a function of the copper nanoparticle concentration.
This process was attributed to secondary crystallization.
Furthermore, it was determined that the chemical composition of the nanoparticles is a blend of metallic copper and cupric oxide.
The formation of copper nanowires was observed by scanning electron microscopy, and the concentration of 0.10% exhibited the best dispersion in comparison with the other concentrations.
The melting temperature of the nanocomposites underwent a slight decrease in comparison with the nylon 6, while thermal stability, crystallization temperature, and crystallinity were increased in relation to the pure polymer.
This behavior is attributed to an efficient dispersion of the nanoparticles and to their functionality as crystal nucleation sites.
For the 0.10% concentration nanocomposite, higher mechanical properties were obtained; tensile strength increased by 8.9%, and the tensile modulus increased by 25.4%; as a consequence, elongation at break was 62% less than that of the polymer matrix.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Sierra-Ávila, Rubén& Pérez-Alvarez, Marissa& Valdez-Garza, Janett& Ávila-Orta, Carlos& Jiménez-Regalado, Enrique& Mata-Padilla, José M.…[et al.]. 2018. Synthesis and Thermomechanical Characterization of Nylon 6Cu Nanocomposites Produced by an Ultrasound-Assisted Extrusion Method. Advances in Materials Science and Engineering،Vol. 2018, no. 2018, pp.1-10.
https://search.emarefa.net/detail/BIM-1120830
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Sierra-Ávila, Rubén…[et al.]. Synthesis and Thermomechanical Characterization of Nylon 6Cu Nanocomposites Produced by an Ultrasound-Assisted Extrusion Method. Advances in Materials Science and Engineering No. 2018 (2018), pp.1-10.
https://search.emarefa.net/detail/BIM-1120830
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Sierra-Ávila, Rubén& Pérez-Alvarez, Marissa& Valdez-Garza, Janett& Ávila-Orta, Carlos& Jiménez-Regalado, Enrique& Mata-Padilla, José M.…[et al.]. Synthesis and Thermomechanical Characterization of Nylon 6Cu Nanocomposites Produced by an Ultrasound-Assisted Extrusion Method. Advances in Materials Science and Engineering. 2018. Vol. 2018, no. 2018, pp.1-10.
https://search.emarefa.net/detail/BIM-1120830
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1120830
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر