Microstructure and Hardness of Cold Work Vanadis 6 Steel after Subzero Treatment at −140°C
المؤلفون المشاركون
Ďurica, Juraj
Ptačinová, Jana
Hudáková, Mária
Kusý, Martin
Jurči, Peter
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2018، العدد 2018 (31 ديسمبر/كانون الأول 2018)، ص ص. 1-7، 7ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2018-03-04
دولة النشر
مصر
عدد الصفحات
7
الملخص EN
The microstructure, phase constitution, and hardness of Cr-V ledeburitic tool steel Vanadis 6 subjected to subzero treatment at −140°C and for different soaking times have been investigated.
The light microscopy, scanning electron microscopy, and X-ray diffraction have been used for microstructural investigations.
The hardness has been evaluated by the Vickers method.
The obtained results assist to draw that subzero treatment reduces the retained austenite amount and increases the population density of carbides, compared to conventional heat treatment.
The extent of decrease in the retained austenite amount makes around 85%, and the increase in population density of small globular carbides was approximately fivefold.
High compressive stresses were identified in the retained austenite, and their values follow the increase in carbide count.
This makes a serious support to the theory explaining the formation of “extra” carbides as a by-product of more complete martensitic transformation.
As a result of the mentioned microstructural changes, the material hardness increased from 875 ± 16 HV 10 up to 954.6 ± 14 HV 10 for conventionally quenched and SZT steels, respectively.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ďurica, Juraj& Ptačinová, Jana& Hudáková, Mária& Kusý, Martin& Jurči, Peter. 2018. Microstructure and Hardness of Cold Work Vanadis 6 Steel after Subzero Treatment at −140°C. Advances in Materials Science and Engineering،Vol. 2018, no. 2018, pp.1-7.
https://search.emarefa.net/detail/BIM-1121431
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ďurica, Juraj…[et al.]. Microstructure and Hardness of Cold Work Vanadis 6 Steel after Subzero Treatment at −140°C. Advances in Materials Science and Engineering No. 2018 (2018), pp.1-7.
https://search.emarefa.net/detail/BIM-1121431
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ďurica, Juraj& Ptačinová, Jana& Hudáková, Mária& Kusý, Martin& Jurči, Peter. Microstructure and Hardness of Cold Work Vanadis 6 Steel after Subzero Treatment at −140°C. Advances in Materials Science and Engineering. 2018. Vol. 2018, no. 2018, pp.1-7.
https://search.emarefa.net/detail/BIM-1121431
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1121431
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر