Fracture Toughness Improvement of Poly(lactic acid) Reinforced with Poly(ε-caprolactone) and Surface-Modified Silicon Carbide
المؤلفون المشاركون
Park, Soo-Jin
Chen, Jie
Zhang, Tian-Yi
Jin, Fan-Long
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2018، العدد 2018 (31 ديسمبر/كانون الأول 2018)، ص ص. 1-10، 10ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2018-12-18
دولة النشر
مصر
عدد الصفحات
10
الملخص EN
In this study, bio-based poly(lactic acid) (PLA)/polycaprolactone (PCL) blends and PLA/PCL/silicon carbide (SiC) composites were prepared using a solution blending method.
The surface of the SiC whiskers was modified using a silane coupling agent.
The effects of the PCL and SiC contents on the flexural properties, fracture toughness, morphology of PLA/PCL blends, and PLA/PCL/SiC composites were investigated using several techniques.
Both the fracture toughness and flexural strength of PLA increased by the introduction of PCL and were further improved by the formation of SiC whiskers.
Fracture surfaces were observed by scanning electron microscopy, which showed that the use of PCL as a reinforcing agent induces plastic deformation in the PLA/PCL blends.
The SiC whiskers absorbed external energy because of their good interfacial adhesion with the PLA matrix and through SiC-PLA debonding in the PLA/PCL/SiC composites.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Chen, Jie& Zhang, Tian-Yi& Jin, Fan-Long& Park, Soo-Jin. 2018. Fracture Toughness Improvement of Poly(lactic acid) Reinforced with Poly(ε-caprolactone) and Surface-Modified Silicon Carbide. Advances in Materials Science and Engineering،Vol. 2018, no. 2018, pp.1-10.
https://search.emarefa.net/detail/BIM-1121437
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Chen, Jie…[et al.]. Fracture Toughness Improvement of Poly(lactic acid) Reinforced with Poly(ε-caprolactone) and Surface-Modified Silicon Carbide. Advances in Materials Science and Engineering No. 2018 (2018), pp.1-10.
https://search.emarefa.net/detail/BIM-1121437
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Chen, Jie& Zhang, Tian-Yi& Jin, Fan-Long& Park, Soo-Jin. Fracture Toughness Improvement of Poly(lactic acid) Reinforced with Poly(ε-caprolactone) and Surface-Modified Silicon Carbide. Advances in Materials Science and Engineering. 2018. Vol. 2018, no. 2018, pp.1-10.
https://search.emarefa.net/detail/BIM-1121437
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1121437
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر