Preparation and Performance of a New-Type Alkali-Free Liquid Accelerator for Shotcrete

الملخص EN

A new type of alkali-free liquid accelerator for shotcrete was prepared.

Specifically, the setting time and strength and shrinkage performance of two kinds of Portland cement with the accelerator were fully investigated.

Moreover, the accelerating mechanism of alkali-free liquid accelerator and the hydration process of the shotcrete with accelerator were explored.

Results show that alkali-free liquid accelerator significantly shortened the setting time of cement paste, where the initial setting time of cement paste with 8 wt% of the accelerator was about 3 min and the final setting time was about 7 min.

Compressive strength at 1 day of cement mortar with the accelerator could reach 23.4 MPa, which increased by 36.2% compared to the strength of cement mortar without the accelerator, and the retention rate of 28-day compressive strength reached 110%.

In addition, the accelerator still shows a good accelerating effect under low temperature conditions.

However, the shrinkage rate of the concrete increased with the amount of the accelerator.

5~8% content of accelerator is recommended for shotcrete in practice.

XRD and SEM test results showed that the alkali-free liquid accelerator promoted the formation of ettringite crystals due to the increase of Al3+ and SO42- concentration.