Effect of Reduction in Thickness and Rolling Conditions on Mechanical Properties and Microstructure of Rolled Mg-8Al-1Zn-1Ca Alloy
المؤلفون المشاركون
Fukuda, Yuta
Noda, Masafumi
Ito, Tomomi
Suzuki, Kazutaka
Saito, Naobumi
Chino, Yasumasa
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2017، العدد 2017 (31 ديسمبر/كانون الأول 2017)، ص ص. 1-9، 9ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2017-07-05
دولة النشر
مصر
عدد الصفحات
9
الملخص EN
A cast Mg-8Al-1Zn-1Ca magnesium alloy was multipass hot rolled at different sample and roll temperatures.
The effect of the rolling conditions and reduction in thickness on the microstructure and mechanical properties was investigated.
The optimal combination of the ultimate tensile strength, 351 MPa, yield strength, 304 MPa, and ductility, 12.2%, was obtained with the 3 mm thick Mg-8Al-1Zn-1Ca rolled sheet, which was produced with a roll temperature of 80°C and sample temperature of 430°C.
This rolling process resulted in the formation of a bimodal structure in the α-Mg matrix, which consequently led to good ductility and high strength, exclusively by the hot rolling process.
The 3 mm thick rolled sheet exhibited fine (mean grain size of 2.7 μm) and coarse grain regions (mean grain size of 13.6 μm) with area fractions of 29% and 71%, respectively.
In summary, the balance between the strength and ductility was enhanced by the grain refinement of the α-Mg matrix and by controlling the frequency and orientation of the grains.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Fukuda, Yuta& Noda, Masafumi& Ito, Tomomi& Suzuki, Kazutaka& Saito, Naobumi& Chino, Yasumasa. 2017. Effect of Reduction in Thickness and Rolling Conditions on Mechanical Properties and Microstructure of Rolled Mg-8Al-1Zn-1Ca Alloy. Advances in Materials Science and Engineering،Vol. 2017, no. 2017, pp.1-9.
https://search.emarefa.net/detail/BIM-1124003
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Fukuda, Yuta…[et al.]. Effect of Reduction in Thickness and Rolling Conditions on Mechanical Properties and Microstructure of Rolled Mg-8Al-1Zn-1Ca Alloy. Advances in Materials Science and Engineering No. 2017 (2017), pp.1-9.
https://search.emarefa.net/detail/BIM-1124003
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Fukuda, Yuta& Noda, Masafumi& Ito, Tomomi& Suzuki, Kazutaka& Saito, Naobumi& Chino, Yasumasa. Effect of Reduction in Thickness and Rolling Conditions on Mechanical Properties and Microstructure of Rolled Mg-8Al-1Zn-1Ca Alloy. Advances in Materials Science and Engineering. 2017. Vol. 2017, no. 2017, pp.1-9.
https://search.emarefa.net/detail/BIM-1124003
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1124003
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر