Influence of Material Selection on the Marginal Accuracy of CADCAM-Fabricated Metal- and All-Ceramic Single Crown Copings

الملخص EN

This study evaluated the marginal accuracy of CAD/CAM-fabricated crown copings from four different materials within the same processing route.

Twenty stone replicas of a metallic master die (prepared upper premolar) were scanned and divided into two groups.

Group 1 (n=10) was used for a pilot test to determine the design parameters for best marginal accuracy.

Group 2 (n=10) was used to fabricate 10 specimens from the following materials with one identical CAD/CAM system (GAMMA 202, Wissner GmbH, Goettingen, Germany): A = commercially pure (cp) titanium, B = cobalt-chromium alloy, C = yttria-stabilized zirconia (YSZ), and D = leucite-reinforced glass-ceramics.

Copings from group 2 were evaluated for the mean marginal gap size (MeanMG) and average maximum marginal gap size (AMaxMG) with a light microscope in the “as-machined” state.

The effect of the material on the marginal accuracy was analyzed by multiple pairwise comparisons (Mann–Whitney, U-test, α=0.05, adjusted by Bonferroni-Holmes method).

MeanMG values were as follows: A: 46.92 ± 23.12 μm, B: 48.37 ± 29.72 μm, C: 68.25 ± 28.54 μm, and D: 58.73 ± 21.15 μm.

The differences in the MeanMG values proved to be significant for groups A/C (p=0.0024), A/D (p=0.008), and B/C (p=0.0332).

AMaxMG values (A: 91.54 ± 23.39 μm, B: 96.86 ± 24.19 μm, C: 120.66 ± 32.75 μm, and D: 100.22 ± 10.83 μm) revealed no significant differences.

The material had a significant impact on the marginal accuracy of CAD/CAM-fabricated copings.