Power Ultrasonic Additive Manufacturing: Process Parameters, Microstructure, and Mechanical Properties
المؤلفون المشاركون
Medraj, Mamoun
Gujba, Abdullahi K.
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2020، العدد 2020 (31 ديسمبر/كانون الأول 2020)، ص ص. 1-17، 17ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2020-02-28
دولة النشر
مصر
عدد الصفحات
17
الملخص EN
Additive manufacturing (AM) for fabricating 3D metallic parts has recently received considerable attention.
Among the emerging AM technologies is ultrasonic additive manufacturing (UAM) or ultrasonic consolidation (UC), which uses ultrasonic vibrations to bond similar or dissimilar materials to produce 3D builds.
This technology has several competitive advantages over other AM technologies, which includes fabrication of dissimilar materials and complex shapes, higher deposition rate, and fabrication at lower temperatures, which results in no material transformation during processing.
Although UAM process optimization and microstructure have been reported in the literature, there is still lack of standardized and satisfactory understanding of the mechanical properties of UAM builds.
This could be attributed to structural defects associated with UAM processing.
This article discusses the effects of UAM process parameters on the resulting microstructure and mechanical properties.
Special attention is given to hardness, shear strength, tensile strength, fatigue, and creep measurements.
Also, pull-out, push-out, and push-pin tests commonly employed to characterize bond quality and strength have been reviewed.
Finally, current challenges and drawbacks of the process and potential applications have been addressed.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Gujba, Abdullahi K.& Medraj, Mamoun. 2020. Power Ultrasonic Additive Manufacturing: Process Parameters, Microstructure, and Mechanical Properties. Advances in Materials Science and Engineering،Vol. 2020, no. 2020, pp.1-17.
https://search.emarefa.net/detail/BIM-1127748
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Gujba, Abdullahi K.& Medraj, Mamoun. Power Ultrasonic Additive Manufacturing: Process Parameters, Microstructure, and Mechanical Properties. Advances in Materials Science and Engineering No. 2020 (2020), pp.1-17.
https://search.emarefa.net/detail/BIM-1127748
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Gujba, Abdullahi K.& Medraj, Mamoun. Power Ultrasonic Additive Manufacturing: Process Parameters, Microstructure, and Mechanical Properties. Advances in Materials Science and Engineering. 2020. Vol. 2020, no. 2020, pp.1-17.
https://search.emarefa.net/detail/BIM-1127748
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1127748
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر