Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel
المؤلفون المشاركون
Abouel Nasr, Emad
Kaid, Husam
Al-Shayea, Adel
Abdullah, Fawaz M.
Noman, Mohammed A.
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2020، العدد 2020 (31 ديسمبر/كانون الأول 2020)، ص ص. 1-15، 15ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2020-08-30
دولة النشر
مصر
عدد الصفحات
15
الملخص EN
The turning, which consists of the removal of metal from the outer diameter of a rotating cylindrical workpiece, is one of the most common techniques for cutting, especially when finishing the product.
The values of the cutting parameters, such as feed rate, cutting speed, and depth of cut, in a turning operation must be selected carefully to improve the profit of operations by enhancing productivity and reducing the total manufacturing cost for each component.
A high vibration leads to poor surface finish and reduced productivity and shortens the tool life; therefore, this parameter should be controlled.
In this study, an experiment is conducted to investigate the effects of these cutting parameters in the turning process of a workpiece, composed of AISI 1040 steel, using the response surface method.
Statistical tools were used to design the experiments.
These parameters are optimized by using analysis of variance, regression, and optimization techniques to achieve the condition of minimum vibration and chip frequency, therefore improving the surface roughness after the turning process.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Al-Shayea, Adel& Abdullah, Fawaz M.& Noman, Mohammed A.& Kaid, Husam& Abouel Nasr, Emad. 2020. Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel. Advances in Materials Science and Engineering،Vol. 2020, no. 2020, pp.1-15.
https://search.emarefa.net/detail/BIM-1128634
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Al-Shayea, Adel…[et al.]. Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel. Advances in Materials Science and Engineering No. 2020 (2020), pp.1-15.
https://search.emarefa.net/detail/BIM-1128634
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Al-Shayea, Adel& Abdullah, Fawaz M.& Noman, Mohammed A.& Kaid, Husam& Abouel Nasr, Emad. Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel. Advances in Materials Science and Engineering. 2020. Vol. 2020, no. 2020, pp.1-15.
https://search.emarefa.net/detail/BIM-1128634
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1128634
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر