Peri-Implant Bone Behavior after Single Drill versus Multiple Sequence for Osteotomy Drill

الملخص EN

Objectives.

The present study aims to compare the drilling protocol effect on osseointegration event in three commercially available titanium dental implants with different drill protocol using a rabbit tibia model.

Materials and Methods.

Three different drilling sequences were compared as follows: drilling sequence using a single unique drill of 4.2 mm conical implant (Group 1), drilling sequence using 3 consecutive cylindrical drills for a 4.1 mm cylindrical implant (Group 2), and drilling sequence using 3 consecutive conical drills for a 4.3 mm conical implant (Group 3).

For each group, 18 drilling procedures and implant placements were performed, totalizing 54 commercially available titanium dental implants.

The samples were removed 6 weeks after implantation.

Resonance frequency analyses (RFA) were performed immediately after the implantation, and at 6 weeks removal torque test (RTt) and histological analysis were performed.

Results.

The RFA measured showed statistical difference between the groups in time 1 and no significant statistical differences in time 2 (p>0.05).

In the RTt no significant difference was found between the 3 groups tested.

Histomorphometric analysis showed no significant difference between groups in the bone-to-implant contact% (p>0.05).

Conclusion.

In the present preclinical study, osteotomy using a single bur did not show differences regarding the proposed and evaluated tests parameters for assessing the peri-implant behavior.