Microstructure, Tensile Property, and Surface Quality of Glass Fiber-Reinforced Polypropylene Parts Molded by Rapid Heat Cycle Molding
المؤلفون المشاركون
Liu, Feng
Li, Taidong
Xu, Fuyu
Li, Jiquan
Jiang, Shaofei
المصدر
Advances in Polymer Technology
العدد
المجلد 2020، العدد 2020 (31 ديسمبر/كانون الأول 2020)، ص ص. 1-15، 15ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2020-03-26
دولة النشر
مصر
عدد الصفحات
15
التخصصات الرئيسية
الملخص EN
The microstructure of a molded product considerably influences its macroscopic properties.
In this study, the influence of molding process on microstructure, tensile property, and surface quality was explored on the glass fiber-reinforced polypropylene (GFRPP) parts molded by rapid heat cycle molding (RHCM) and conversion injection molding (CIM).
Tensile strength and surface gloss were chosen to measure macroscopic properties of the molded parts.
The microstructure including multilayer, fiber orientation, crystallinity, and fiber-matrix bonding strength were analyzed by simulations, scanning electron microscopy, wide-angle X-ray diffraction, and dynamic mechanical analysis.
The relationship between the macroscopic properties and microstructure of the RHCM samples was also discussed.
The results indicate that as the mold cavity surface temperature increases, the tensile strength increases firstly and decreases thereafter.
The tensile strength of RHCM parts reached the maximum at the mold heating temperature of 60°C.
It is also observed that the surface gloss of the sample increases as the mold cavity surface temperature rises, and the increase of surface gloss decreases distinctly with the mold heating temperature higher than 90°C.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Liu, Feng& Li, Taidong& Xu, Fuyu& Li, Jiquan& Jiang, Shaofei. 2020. Microstructure, Tensile Property, and Surface Quality of Glass Fiber-Reinforced Polypropylene Parts Molded by Rapid Heat Cycle Molding. Advances in Polymer Technology،Vol. 2020, no. 2020, pp.1-15.
https://search.emarefa.net/detail/BIM-1130217
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Liu, Feng…[et al.]. Microstructure, Tensile Property, and Surface Quality of Glass Fiber-Reinforced Polypropylene Parts Molded by Rapid Heat Cycle Molding. Advances in Polymer Technology No. 2020 (2020), pp.1-15.
https://search.emarefa.net/detail/BIM-1130217
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Liu, Feng& Li, Taidong& Xu, Fuyu& Li, Jiquan& Jiang, Shaofei. Microstructure, Tensile Property, and Surface Quality of Glass Fiber-Reinforced Polypropylene Parts Molded by Rapid Heat Cycle Molding. Advances in Polymer Technology. 2020. Vol. 2020, no. 2020, pp.1-15.
https://search.emarefa.net/detail/BIM-1130217
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1130217
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر