![](/images/graphics-bg.png)
Influence of Processing Conditions on the Mechanical Behavior and Morphology of Injection Molded Poly(lactic-co-glycolic acid) 85:15
المؤلفون المشاركون
Melo, Liliane Pimenta de
Salmoria, Gean Vitor
Fancello, Eduardo Alberto
Roesler, Carlos Rodrigo de Mello
المصدر
International Journal of Biomaterials
العدد
المجلد 2017، العدد 2017 (31 ديسمبر/كانون الأول 2017)، ص ص. 1-8، 8ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2017-08-07
دولة النشر
مصر
عدد الصفحات
8
التخصصات الرئيسية
الملخص EN
Two groups of PLGA specimens with different geometries (notched and unnotched) were injection molded under two melting temperatures and flow rates.
The mechanical properties, morphology at the fracture surface, and residual stresses were evaluated for both processing conditions.
The morphology of the fractured surfaces for both specimens showed brittle and smooth fracture features for the majority of the specimens.
Fracture images of the notched specimens suggest that the surface failure mechanisms are different from the core failure.
Polarized light techniques indicated birefringence in all specimens, especially those molded with lower temperature, which suggests residual stress due to rapid solidification.
DSC analysis confirmed the existence of residual stress in all PLGA specimens.
The specimens molded using the lower injection temperature and the low flow rate presented lower loss tangent values according to the DMA and higher residual stress as shown by DSC, and the photoelastic analysis showed extensive birefringence.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Melo, Liliane Pimenta de& Salmoria, Gean Vitor& Fancello, Eduardo Alberto& Roesler, Carlos Rodrigo de Mello. 2017. Influence of Processing Conditions on the Mechanical Behavior and Morphology of Injection Molded Poly(lactic-co-glycolic acid) 85:15. International Journal of Biomaterials،Vol. 2017, no. 2017, pp.1-8.
https://search.emarefa.net/detail/BIM-1160085
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Melo, Liliane Pimenta de…[et al.]. Influence of Processing Conditions on the Mechanical Behavior and Morphology of Injection Molded Poly(lactic-co-glycolic acid) 85:15. International Journal of Biomaterials No. 2017 (2017), pp.1-8.
https://search.emarefa.net/detail/BIM-1160085
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Melo, Liliane Pimenta de& Salmoria, Gean Vitor& Fancello, Eduardo Alberto& Roesler, Carlos Rodrigo de Mello. Influence of Processing Conditions on the Mechanical Behavior and Morphology of Injection Molded Poly(lactic-co-glycolic acid) 85:15. International Journal of Biomaterials. 2017. Vol. 2017, no. 2017, pp.1-8.
https://search.emarefa.net/detail/BIM-1160085
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1160085
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
![](/images/ebook-kashef.png)
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر
![](/images/kashef-image.png)