Corrosion Behavior of Brazed Zinc-Coated Structured Sheet Metal

الملخص EN

Arc brazing has, in comparison to arc welding, the advantage of less heat input while joining galvanized sheet metals.

The evaporation of zinc is reduced in the areas adjacent to the joint and improved corrosion protection is achieved.

In the automotive industry, lightweight design is a key technology against the background of the weight and environment protection.

Structured sheet metals have higher stiffness compared to typical automobile sheet metals and therefore they can play an important role in lightweight structures.

In the present paper, three arc brazing variants of galvanized structured sheet metals were validated in terms of the corrosion behavior.

The standard gas metal arc brazing, the pulsed arc brazing, and the cold metal transfer (CMT®) in combination with a pulsed cycle were investigated.

In experimental climate change tests, the influence of the brazing processes on the corrosion behavior of galvanized structured sheet metals was investigated.

After that, the corrosion behavior of brazed structured and flat sheet metals was compared.

Because of the selected lap joint, the valuation of damage between sheet metals was conducted.

The pulsed CMT brazing has been derived from the results as the best brazing method for the joining process of galvanized structured sheet metals.