Analysis of CSN 12050 Carbon Steel in Dry Turning Process for Product Sustainability Optimization Using Taguchi Technique
المؤلفون المشاركون
Wakjira, Melesse Workneh
Altenbach, Holm
Perumalla, Janaki Ramulu
المصدر
العدد
المجلد 2019، العدد 2019 (31 ديسمبر/كانون الأول 2019)، ص ص. 1-10، 10ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2019-04-01
دولة النشر
مصر
عدد الصفحات
10
التخصصات الرئيسية
الملخص EN
The aim of this research paper is to investigate the machinability of CSN 12050 carbon steel bars using carbide insert tool in order to utilize the optimum cutting parameters by employing Taguchi approach.
Experiments have been performed under dry cutting condition using an optimization approach according to Taguchi’s L9(34) orthogonal arrays; signal-to-noise ratio tests are designed.
Analysis of variance (ANOVA) was performed to determine the importance of machining parameters on the material removal rate (MRR).
The results were analyzed using signal-to-noise ratios (S/N); 3D surface graphs, main effect graphs of mean, and predictive equations are employed to study the performance characteristics.
The optimal parameters resulted as A3B2C3 (i.e., cutting speed 275 (m/min), depth of cut 0.35 (mm), and feed rate 0.25 (mm/rev), respectively).
In the present study, there is an improvement of 5.22 dB at optimal cutting conditions for each significant MRR response parameters such as cutting speed, depth of cut, and feed rate.
With these proposed optimal parameters, it is possible to optimize machinability for product sustainability.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Wakjira, Melesse Workneh& Altenbach, Holm& Perumalla, Janaki Ramulu. 2019. Analysis of CSN 12050 Carbon Steel in Dry Turning Process for Product Sustainability Optimization Using Taguchi Technique. Journal of Engineering،Vol. 2019, no. 2019, pp.1-10.
https://search.emarefa.net/detail/BIM-1173621
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Wakjira, Melesse Workneh…[et al.]. Analysis of CSN 12050 Carbon Steel in Dry Turning Process for Product Sustainability Optimization Using Taguchi Technique. Journal of Engineering No. 2019 (2019), pp.1-10.
https://search.emarefa.net/detail/BIM-1173621
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Wakjira, Melesse Workneh& Altenbach, Holm& Perumalla, Janaki Ramulu. Analysis of CSN 12050 Carbon Steel in Dry Turning Process for Product Sustainability Optimization Using Taguchi Technique. Journal of Engineering. 2019. Vol. 2019, no. 2019, pp.1-10.
https://search.emarefa.net/detail/BIM-1173621
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-1173621
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر