Verification of Thermal Models of Internally Cooled Gas Turbine Blades

الملخص EN

Numerical simulation of temperature field of cooled turbine blades is a required element of gas turbine engine design process.

The verification is usually performed on the basis of results of test of full-size blade prototype on a gas-dynamic test bench.

A method of calorimetric measurement in a molten metal thermostat for verification of a thermal model of cooled blade is proposed in this paper.

The method allows obtaining local values of heat flux in each point of blade surface within a single experiment.

The error of determination of local heat transfer coefficients using this method does not exceed 8% for blades with radial channels.

An important feature of the method is that the heat load remains unchanged during the experiment and the blade outer surface temperature equals zinc melting point.

The verification of thermal-hydraulic model of high-pressure turbine blade with cooling allowing asymmetrical heat removal from pressure and suction sides was carried out using the developed method.

An analysis of heat transfer coefficients confirmed the high level of heat transfer in the leading edge, whose value is comparable with jet impingement heat transfer.

The maximum of the heat transfer coefficients is shifted from the critical point of the leading edge to the pressure side.